1982 Corvette: How-To: TPI Fuel Rail Removal (Fuel Injector Replacement) Submitted by: KANE 11-30-2007 Today I'm going to take you through a picture tutorial of what it looks like to break down the TPI system far enough to get the fuel rail... Read More
How-To Articles by CAC Forum Members
Submitted by: Scott81 10-26-2006 The hoses are pretty easy to change. First step is jack up the Vette and get it level on 4 stands. Take off the front wheel then using a line wrench (please use a line wrench, it will be SO much easier and will... Read More
1981 Corvette: Repairing Driver Side Sun Visor Submitted by: bill81vette With a small screw driver pop off the plug covering the top hole where the visor keeps falling out of. Remove the old clip(its probably broken) and the spring. Place the new... Read More
Submitted by: 69MyWay 10-26-2006 This topic comes up often, so I thought I would share what I have learned with others considering the mod. Thanks to John AKA Black Thunder I have had the awesome opportunity to install a set of 1994 Corvette seats... Read More
1968 - 1982 Corvette: How-To: TPI for a C3: A couple things that worked well for me over the years Submitted by: KANE 09-21-2008 Many folks have done the swap... I'm documenting some of the things that I have found that work well between... Read More
Submitted by: Eddie 70 March 15, 2009 I had been wanting to install one of the spreader bars for a long time just to firm up the front suspension. Well I finally broke down and spent the money. When the package finally arrived at my door I was... Read More
1965 - 1982 Corvette: How-To: Bleeding Brakes Submitted by: Hib Halverson 05-03-2007 The 1965 - 1982 Corvette brake caliper is prone to air leaks. If you have not replaced your OE calipers with stainless steeel sleeved calipers, I'd do that... Read More
Submitted by: GTR1999 Since this topic is another one that always comes up I figured I'd post some pictures of the job I was doing for a forum buddy. This job is rebuilding the front spindles and installing new stock rotors. As a lot of you... Read More