Corvette Action Center - The ultimate online hub of Corvette news and information! Click here to go to to the 2014 C7 Corvette Center

Supporting Vendors / Dealers - Supporting Membership - Advertising Information
Results 1 to 7 of 7

Thread: Help Please.. Tranny..

  1. #1
    Member
    Join Date
    Apr 2004
    Location
    Smokey..
    Posts
    87
    Corvette(s)
    2000 pewter convertable 6m

    Default Help Please.. Tranny..

    I have a 2000 conv vette 6 speed. All of a sudden, when I put the car in reverse and start to back up it would pop out of gear. 1-6 gear smooth shifting and doesnt pop out, only reverse. Some times it doent but I would say twice every 5 times I back up it would pop out and make a bang noise. Does anybody know if there is a linkage or something that may be wearing out? Any body come across this issue? If so how hard is it to fix and if a dealer fixes it what would I expect to pay to have this problem resolved?

    Thanks, Bob..

  2. #2
    Member vette747's Avatar
    Join Date
    Oct 2005
    Location
    Montreal
    Posts
    154
    Corvette(s)
    1984 White, 1997 Silver. Drive it like you test it

    Default

    I have an A4 but read a few posts about that on the corvette mechanic forum.

    Reverse pop up.
    http://corvettemechanic.com/board/in...88&hl=shifter&

    Shifter ajustement.
    http://corvettemechanic.com/board/in...=3&t=2124&hl=&

  3. #3
    Member
    Join Date
    Apr 2004
    Location
    Smokey..
    Posts
    87
    Corvette(s)
    2000 pewter convertable 6m

    Default

    Thanks Vette 747 Ill take a look into that..

  4. #4
    Supporting Member DRTH VTR's Avatar
    Join Date
    May 2002
    Location
    Boise, Idaho
    Posts
    4,823
    Corvette(s)
    2002 electron blue Z06

    Default

    Shifter adjustment was the first thing I thought of, too.
    Save the Wave!

  5. #5
    Member
    Join Date
    Apr 2004
    Location
    Smokey..
    Posts
    87
    Corvette(s)
    2000 pewter convertable 6m

    Default

    Has anyone performed this adjustment? If so how hard is it and how do you make the adjustment?

    Thanks, Bob..

  6. #6
    Supporting Member DRTH VTR's Avatar
    Join Date
    May 2002
    Location
    Boise, Idaho
    Posts
    4,823
    Corvette(s)
    2002 electron blue Z06

    Default

    The second link above goes to a post in corvettemechanic. It is a post by c4c5specialist, who is frequently seen on this site. I have pasted his post here. I hope that is OK, Paul.


    HI there,
    What I would suggest first, is a shifter adjustment.

    If you reference the picture below, you will find the shifter adjustment pin and assembly.

    Once you remove the trim bezel and rubber isolation boot, you will see this.

    Simply put the transmission in neutral with the Ebrake on, loosen the 3 Torx fasteners, 2 on the torque tube and one on the pinch bolt for the shifter rod.
    Drop the pin into the slot and retorque the fasteners, all 3 to 30 N.M or 22 ft lbs. The 2 torque tube fasteners first, then the pinch bolt.

    Let us know how you make out after this. Many people can claim to bend shifter forks, but very few actually are. Unless you are racing every week, I would doubt that you have this problem.

    Allthebest, c4c5
    Save the Wave!

  7. #7
    Member
    Join Date
    Apr 2004
    Location
    Smokey..
    Posts
    87
    Corvette(s)
    2000 pewter convertable 6m

    Default

    Thanks, Ill let you guys know how I make out when I get around to it. Its winter so Its sleeping in the garage.. Hopefully after the holidays..

    Thanks, Bob..

Similar Threads

  1. Transmission removal
    By NT Vettman in forum C4 Technical and Performance
    Replies: 25
    Last Post: 05-10-05, 10:37 PM
  2. BEWARE...Tranny filter kits all not the same
    By tntcorvette in forum C4 Technical and Performance
    Replies: 6
    Last Post: 05-03-04, 05:05 PM
  3. "cooked" auto tranny?
    By 78SilvAnniv in forum C3 Technical and Performance
    Replies: 25
    Last Post: 02-24-04, 12:58 AM
  4. NEED ADVICE...Transmission Rebuilders trashed my #s Matching tranny
    By sparky in forum C3 Technical and Performance
    Replies: 11
    Last Post: 01-03-04, 10:36 AM
  5. Debate: Where to mount tranny temp. sensor?
    By tntcorvette in forum C4 Technical and Performance
    Replies: 14
    Last Post: 01-18-03, 11:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© CORVETTE is a registered trademark of the General Motors Corporation & Chevrolet Motor Division.  Neither Chevrolet Motor Division nor any subsidiaries of GM© shall bear any responsibility for CorvetteActionCenter.com content, comments, or advertising. CorvetteActionCenter.com is independent from GM© and is not affiliated with, sponsored or supported by GM©.  Copyright/trademark/sales mark infringements are not intended, or implied.  All Rights Reserved