Skip to Content

Technical Article: Spring Thing - Putting the "Spring" Back In Your Corvette’s Step

Estimated Reading Time: < 1 Minute
254  Rob Loszewski July 15, 2014  General Topics 0

By John Hinckley, Corvette Enthusiast Magazine
Used here with permission.
Copyright John Hinckley, Corvette Enthusiast Magazine

THE OBJECTIVE of this article is to show you the “right” way to rebuild/re-arch Corvette leaf springs, and to share some knowledge about how leaf springs were designed and manufactured, and how they can be “brought back to life,” assuming they’re basically serviceable.

Full Article is 3-page PDF attached below:
Rating: 3 (1 Votes)
Technical Article: Spring Thing - Putting the "Spring" Back In Your Corvette’s Step
Estimated Reading Time: < 1 Minute  Rob Loszewski July 15, 2014 0
  • Attached Files
  • eaton_spring_hinckley.pdf (1.58 MB) 847
    • Secure Code

    Powered by PHPKB (Knowledge Base Software)