$projecthp

Search:

Type: Posts; User: Kevo; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    827

    Idk that D36 has a 3.42 available. You will need...

    Idk that D36 has a 3.42 available. You will need to change speedometer gears. To calibrate speedometer. There is one on the output shaft of transmission the other is on the Vehicle Speed Sensor (vss)...
  2. Thread: No start

    by Kevo
    Replies
    60
    Views
    11,916

    Help! There really isn't a non professional DIY...

    There really isn't a non professional DIY injector cleaner. You could send them out to FIC or another injector service and have them tested then rebuilt or replaced. Dealers should have stuff to...
  3. Thread: No start

    by Kevo
    Replies
    60
    Views
    11,916

    Help! If you have a noid light you can see if injectors...

    If you have a noid light you can see if injectors are turning on. A test light will do the same thing. But test light has to be connected to positive terminal. Computer grounds injectors
    There are...
  4. Thread: No start

    by Kevo
    Replies
    60
    Views
    11,916

    Help! You need a gauge to check pressure, if less than...

    You need a gauge to check pressure, if less than 40 check regulator. If vacuum port leaks fuel it needs replaced. Pump is in tank. Pump fuel filler well to access. You might add 5 gallons to be sure...
  5. Replies
    5
    Views
    1,916

    that kinda looks like cosmoline ,which was used...

    that kinda looks like cosmoline ,which was used shipping cars across the ocean. It can be a pain to remove on metal. If it is I wouldn't mess with it, The solvents to remove it, may attack resin in...
  6. Replies
    5
    Views
    1,916

    Since cars are shipped by boat to and from Hawaii...

    Since cars are shipped by boat to and from Hawaii it maybe some kind or "rust preventer" Not knowing what it is, I would talk to a marine supply store for suggestion of what to do.
  7. Replies
    5
    Views
    4,304

    it seems i have the original 10mm nuts and 3/8...

    it seems i have the original 10mm nuts and 3/8 rocker arms. Just a "Senior Moment" :happyanim:just need correct lock nuts.
  8. Replies
    5
    Views
    4,304

    I got the rocker arms and nuts several years ago....

    I got the rocker arms and nuts several years ago. I thought they were normal roller rockers not realizing they were the production non adjustable set up. Chevrolet chose to build 2 LT4s the "over the...
  9. Replies
    5
    Views
    4,304

    Unfortunately those are the opposite of what I...

    Unfortunately those are the opposite of what I need. 10mm threads in to head and 3/8 stud for commonly available rocker arms. Thanks though.
  10. Replies
    5
    Views
    4,304

    10mm LT4 rocker studs

    I have a set of production non adjustable LT4 rockers and nuts, I can't find studs. Has anyone ever tried to use Pontiac bottle neck studs in place of the pedestal studs used on LT4. They are 7/16 at...
  11. Replies
    3
    Views
    1,630

    If you remove seat cushions it is easier to see...

    If you remove seat cushions it is easier to see what is going on.
  12. Replies
    6
    Views
    1,551

    Generally when one rebuilds an engine that would...

    Generally when one rebuilds an engine that would include the heads, a valve job and new seals would be the norm. I do understand the part that these the less than desireable iron heads. Although I...
  13. Thread: 1984 Dash Display

    by Kevo
    Replies
    2
    Views
    1,598

    no speed sensor signal would set code and turn on...

    no speed sensor signal would set code and turn on check engine light. I believe vss signal goes to cluster and the then to ecm. I would have cluster checked. this may help

    CrazyUncleBurton.com -...
  14. Replies
    1
    Views
    1,049

    I think its just a matter of preference and...

    I think its just a matter of preference and budget. If your planning on driving it when the snow flies I would go with stainless if possible.
  15. Question: OEM Remote Keyless Entry does not have a...

    OEM Remote Keyless Entry does not have a automatic function in 1992. That came in 93. You definitely want to make additional door key. Unlocking services should be able unlock it. You do need to find...
  16. Question: If you can find out alarm brand and model number...

    If you can find out alarm brand and model number try to contact manufacturer, authorized dealer/installer, or google with condition. Tell them whats going on see if they can give advice. Depending on...
  17. Low resistance causes EMI solid wire core or...

    Low resistance causes EMI solid wire core or copper core wires are only used on old time antique cars and some drag cars. Most modern cars are using 7mm or larger wires. Normally they will ohm out...
  18. Replies
    8
    Views
    1,589

    Question: Typically aftermarket alarms tie into car under...

    Typically aftermarket alarms tie into car under steering column and the module is attached or tucked under there too. It's possible wiring was disturbed or disconnected during course of column...
  19. Replies
    8
    Views
    3,175

    Question: Waterleaks are a pain. they are also hard to tell...

    Waterleaks are a pain. they are also hard to tell someone what to do without seeing car. There should be a weather seal or barrier that seals door from door trim panel they can deteriorate, get torn,...
  20. Replies
    6
    Views
    1,605

    Question: Slight miss under light load is usually a lean...

    Slight miss under light load is usually a lean condition. The egr valve under intake doesn't allow for much testing you could disconnect it and see what happens. Make sure maf is clean of any oily...
  21. Question: GM Dealers have remote tester, typically they...

    GM Dealers have remote tester, typically they don't charge to tester them at parts counter. If you go to service dept they may. Not all remotes easily come apart so they can be checked out. Most of...
  22. Help! for fuel pressure to bleed off the way it does...

    for fuel pressure to bleed off the way it does fuel pump check valve is not holding or pulsator, a diaphragm between fuel pump and sender to reduce noise,is leaking if present. Leaking injectors, or...
  23. Help! Check fuel pressure regulator for leaking fuel...

    Check fuel pressure regulator for leaking fuel out vacuum port. With drop in pressure fuel has to be going somewhere. If this has been going on for a while cat converter could be restricted.
  24. Replies
    1
    Views
    1,169

    Help! My guess optispark if it's original. You really...

    My guess optispark if it's original. You really need to know what you don't have when it doesn't restart. You are losing :

    Fuel - no fuel pressure - fuel pump or relay, fuel pressure regulator...
  25. Thread: wardup

    by Kevo
    Replies
    2
    Views
    975

    Question: relay(s) are a good place to start. The early OEM...

    relay(s) are a good place to start. The early OEM relays were prone to failure. Be sure Foil in MAF foil/film is not covered with oil.
Results 1 to 25 of 46
Page 1 of 2 1 2