Search:

Would you have any ignition shielding or 66 sidepipe moldings?

Thanks Tom!

Does anyone know the original GM parts #'s for the 1966 corvette battery tray and shield (non-ac)? If you have a picture(s) that would be great. The repros do not look accurate to me.

Want to replace my in-correct battery tray with the correct one. Passenger side tray, stud, j-bolt, and spacers.
BOUGHT

Need to replace my broken 1966 Bright Blue dash insert (grab bar), 6 hole.

Need to replace my lost clock adjustment knob with a very nice 1966 original.

Need a battery tray and hold down rods for 66 vette w/o air.

BOUGHT

My clock is trashed and I want to keep an original. So looking to buy a nice, running clock. Will accept movement only if necessary. NO LONGER NEEDED.

You are correct. There are two #8 bolts on the calipers and another sets of longer #8 bolts hold the calipers together. Thanks for redirecting me. Got them off and am installing a new kit. I had...

I have not used a Chilton for 40 years. But I do have and use the 1966 Service Manual, Restoration Source Book, and Vette Vues Fact Book for the String Ray. Thanks for the suggestion.

Getting my 66 roadster ready for summer and checking out the calipers, rotors and seals. No problem with the rear, simply remove 2 bolts. But the fronts seem different. Only thing I see to remove...

I have purchased all of these items. Thanks.

These are original GM sills still in the paper with GM #3797499?
If so, I'd offer you $135 for both. Don't know if I am high or low but repos are going for $38 pr.

e-mail me at...

I may be interested in buying. What price? Mike

Need following parts for my restoration.

1. door lock knobs - #38636802. door pulls - #3876569 & #3876570
3. sill plates - #3797499
4. window cranks - #5719477
5. vent window cranks -...