$projecthp
  • 2003 Z06 Reveal molding above windows replacement procedure
  • 2003 Z06 Reveal molding above windows replacement procedure
  • 2003 Z06 Reveal molding above windows replacement procedure
  • 2003 Z06 Reveal molding above windows replacement procedure

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Jun 2015
    Location
    Austin
    Posts
    2
    Corvette(s)
    2003 Z06
    Post Thanks / Like
    Rides
    0

    Default 2003 Z06 Reveal molding above windows replacement procedure

    Picked up the parts yesterday at dealer. 10331562 right and 10331563 left are the correct numbers for the moldings. Most other websites are not listing the correct part numbers for C5 Z06.
    Does anyone know what caused the failure of the original parts? I want to make sure that this doesn't happen again.
    What disassembly/assembly items do I need to be careful with?
    Where do I start to remove the weather strip?
    My research says that I should use a 3/16 dia rope of 3M caulk 08578 over the full length of the part and around each screw to assure a good seal.
    Is this the correct weather strip adhesive number 3M 0811?
    I plan to use 3M adhesive remover 08984 to clean up old adhesive.
    What is the torque of the screws?
    Any advise would be appreciated.

  2. #2
    New Member
    Join Date
    Dec 2016
    Location
    Portland, Oregon
    Posts
    2
    Corvette(s)
    2003 MY Z06
    Post Thanks / Like
    Rides
    0

    Default

    Anyone replace a 2003 Z06 Reveal molding above windows?

    My drivers door trim has a break also. With the cost of the plastic trim and the rubber molding, I would rather get advice before buying and attempting the repair. Right now it is only bugging me and my OCD need to keep up on broken items. I currently don't have any door leaks and want to keep it that way.

  3. #3
    New Member
    Join Date
    Jun 2015
    Location
    Austin
    Posts
    2
    Corvette(s)
    2003 Z06
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by C5racer View Post
    Anyone replace a 2003 Z06 Reveal molding above windows?

    My drivers door trim has a break also. With the cost of the plastic trim and the rubber molding, I would rather get advice before buying and attempting the repair. Right now it is only bugging me and my OCD need to keep up on broken items. I currently don't have any door leaks and want to keep it that way.
    I did this replacement in May 2018 on both sides of my car. So far everything is good. If I remember correctly it took about 7 hours to do the first side and 4 hours to do the other side. It takes lots of patience and care not to damage anything, however very worthwhile to do. I plan on publishing a procedure that I used in the future.

Similar Threads

  1. Question: Battery Replacement Procedure
    By njlouc in forum C5 Technical and Performance
    Replies: 8
    Last Post: 04-11-09, 08:23 AM
  2. Replies: 0
    Last Post: 01-05-09, 06:09 PM
  3. For Sale: 84-96 Corvette Windshield Reveal Molding Set
    By SPEEDEMON in forum C4 Parts For Sale / Wanted
    Replies: 1
    Last Post: 04-12-07, 12:23 AM
  4. door window molding replacement
    By dknjax in forum C5 General Discussion
    Replies: 3
    Last Post: 12-08-04, 11:14 AM
  5. door window molding replacement
    By dknjax in forum C5 Technical and Performance
    Replies: 0
    Last Post: 12-07-04, 09:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •