• C5 Street Series Long Tube Headers: Anyone here have them on their C5?
  • C5 Street Series Long Tube Headers: Anyone here have them on their C5?
  • C5 Street Series Long Tube Headers: Anyone here have them on their C5?
  • C5 Street Series Long Tube Headers: Anyone here have them on their C5?

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 13 of 13
  1. #1
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default C5 Street Series Long Tube Headers: Anyone here have them on their C5?

    I plan to contact LG today to see what I need to order to match up with the GM Performance LS6/Clutch Pkg.
    that was installed last summer.


    Later . . . . . .
    6 Shooter

  2. #2
    Gone but not forgotten Remo's Avatar
    Join Date
    Jun 2002
    Location
    West Townsend, MA
    Posts
    2,835
    Post Thanks / Like
    Rides
    0

    Default 02 Sensors

    Dwayne,

    The LG's are great headers. I went with Kooks just because other folks I know had them. One issues that I had was, which is common across all these headers units, was the 02 sensors throwing codes. I wonder if others have had this problem.
    Remo



  3. #3
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default

    Remo - Good Morning!

    During conversation with LG yesterday they said unless you have a good tune on your Vette after installation you will get 02 sensor codes.

    They said it would take a little over 6 hours to install the headers and tune my Vette, it'd sure be nice to get a few days of work at Arlington Assembly...

    L8TR - D

  4. #4
    Member MM-C5's Avatar
    Join Date
    Jun 2003
    Location
    28.0 N x 82.77W
    Posts
    391
    Post Thanks / Like
    Rides
    0

    Default

    Just checked the email and clicked this link.

    It appears that there has been another great disturbance within The Force.

    If JEDDI-1 wasn't still in dry-dock I'd send some links myself!

    TM
    There Is No Cure
    But There Is




  5. #5
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default

    OK Tom - We need a good picture of JEDDI-1!

    L8TR - D

  6. #6
    Member MM-C5's Avatar
    Join Date
    Jun 2003
    Location
    28.0 N x 82.77W
    Posts
    391
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by 6 Shooter View Post
    OK Tom - We need a good picture of JEDDI-1!

    L8TR - D
    See above note re: Dry-Dock.

  7. #7
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default


    Great pictures of Tom's JEDDI-1




  8. #8
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? BigJimZ16's Avatar
    Join Date
    Oct 2008
    Location
    Portage, Indiana
    Posts
    905
    Post Thanks / Like
    Rides
    0

    Default

    Now that is SWEET with a capital SW!!!
    The only thing that you accomplish when you make something idiotproof, is breed a better grade of idiot,

  9. #9
    Member MM-C5's Avatar
    Join Date
    Jun 2003
    Location
    28.0 N x 82.77W
    Posts
    391
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by BigJimZ16 View Post
    Now that is SWEET with a capital SW!!!
    Thanks for the kudos!

    And Shooter.....Thanks for the promos!

    TM
    There Is No Cure
    But There Is




  10. #10
    Member Edmond's Avatar
    Join Date
    Aug 2001
    Location
    Louisiana
    Posts
    5,218
    Post Thanks / Like
    Rides
    0

    Default

    Dwayne,

    While they have the car up and the exhaust off, have them install a tunnel plate to get the chasis more rigid. All it is are about 2 million little bolts around the perimeter of the tunnel plate.

    I have the Pro's but from my understanding, the Street's are usually better for <450 or so HP vehicles. I can tell that the car is quicker but it seems like the power was gained on the higher end. I actually ordered the Street's but they were on backorder for a few weeks. After about 3 weeks, LG Motorsports offered to sub the Pro's for the streets so I accepted their offer.

    You will really be pleased with the system. It's made for LG by Borla.

  11. #11
    C5 Street Series Long Tube Headers: Anyone here have them on their C5? 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default

    Edmond - I'll talk with Anthony about that next week, I plan to ask him about wire protectors and coating per JR's response in the other thread.

    L8TR - D

  12. #12
    Member Edmond's Avatar
    Join Date
    Aug 2001
    Location
    Louisiana
    Posts
    5,218
    Post Thanks / Like
    Rides
    0

    Default

    I didn't get mine coated, they're stainless so I think they'll be okay.

    I just used the stock wire protectors and there is not rubbing of any sort. I know that some places sell "socks" to cover the wires from the headers.

    Also, you will probably save 20-25 pounds by going with the headers over the stock exhaust manifolds. The stock manifolds are very heavy!

    Are you going with or without cats? I'm running the high flow cats on mine even though we don't have emissions testing here in Oklahoma.

    Let me know your schedule, it would be nice to finally meet you after all these years! I'm about 3 hours north of Dallas.

  13. #13
    Member Edmond's Avatar
    Join Date
    Aug 2001
    Location
    Louisiana
    Posts
    5,218
    Post Thanks / Like
    Rides
    0

    Default

    Also, the most important thing:

    INSIST THAT THEY USE NEW HEADER BOLTS!!! Jeg's sold me the wrong bolts and I reused the old ones, one of them ended up breaking off in the head, $240 later, it was removed. Get new header bolts!

Similar Threads

  1. April 2002: C5 Owners Speak Out!
    By Rob in forum Wheelspin
    Replies: 11
    Last Post: 11-23-06, 03:07 PM
  2. long tube headers: emmissions?
    By sothpaw in forum C4 Technical and Performance
    Replies: 14
    Last Post: 02-08-03, 07:57 PM
  3. Shorty vs Long Tube Headers
    By Jefe in forum C5 Technical and Performance
    Replies: 7
    Last Post: 11-28-02, 03:50 PM
  4. Long Tube headers
    By Trance_LT4 in forum C4 Technical and Performance
    Replies: 14
    Last Post: 05-22-02, 07:57 AM
  5. Stainless Steel Long Tube Headers
    By Burnnrubber in forum C4 Technical and Performance
    Replies: 15
    Last Post: 04-02-02, 08:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •