Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: column Lock

  1. #1
    Member
    Join Date
    Jul 2002
    Location
    Gunter,Texas USA
    Posts
    86
    Post Thanks / Like
    Rides
    0

    Default column Lock

    Service steering column lock is showing up on the DIC. Nothing seems wrong .
    Any one knows what this could mean? Thanks

  2. #2
    column Lock 6 Shooter's Avatar
    Join Date
    May 2002
    Location
    Missoura Ozarks
    Posts
    8,600
    Post Thanks / Like
    Rides
    0

    Default Usually nothing good...


  3. #3
    Member njlouc's Avatar
    Join Date
    Jan 2009
    Location
    New Jersey
    Posts
    401
    Post Thanks / Like
    Rides
    0

    Default

    I got my Y2K (automatic) in dec. The display reads "Service steering column lock" when I start the car. I hit the reset and it stays off until next startup. Runs fine! A little annoying, but ok. I went through the codes and there were none. A trip to MY local stealership verified that the "fix" was made by the original dealer years ago. I dont trust any of them so I will leave it alone. I also called Chev. and they said that I should see the dealer. These things are trouble but if it is of no bother I will leave it . Luckily I dont get the dreaded gas shut off! BTW if anyone has a fix let me know.

  4. #4
    Member
    Join Date
    Jul 2002
    Location
    Gunter,Texas USA
    Posts
    86
    Post Thanks / Like
    Rides
    0

    Default

    Up Date: After reading several postings, realized my trouble with the "service steering lock" did not start till I had weaken the battery working on head lights. I disconnected the battery over night, charged it, reconnected the next day and no service message.
    Thanks all!

Similar Threads

  1. Steering Column Lock - Solution???
    By sci68 in forum C5 Technical and Performance
    Replies: 68
    Last Post: 06-10-16, 10:52 AM
  2. Column lock problem AFTER car was wrecked!
    By c5blackvert in forum C5 Technical and Performance
    Replies: 52
    Last Post: 06-23-08, 09:42 PM
  3. My DIC says Pull key-wait 10 sec & service column lock
    By Daves85 in forum C5 Technical and Performance
    Replies: 7
    Last Post: 09-15-07, 05:40 AM
  4. Column Lock Failure
    By TODD L GRIFFITH in forum C5 Z06 Discussion
    Replies: 13
    Last Post: 07-06-07, 02:31 PM
  5. Column Lock Recall - Column Lock Removal?
    By Greg C in forum C5 General Discussion
    Replies: 8
    Last Post: 08-15-04, 10:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •