$projecthp
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Wisdom
    Guest

    Default Solid Targa Top Corner Repair?

    I located a previous year solid top for my '04 C5, but one of the corners looks like it was sanded away since if doesn't fit the trim any more and you can visually see a gap where it should follow the rest of the body line. I suspect that the previous owner dropped the top on the corner and did a poor man's repair. A vette driver would see it right away, while a non-vette owner may look at it and not fully realize what they are looking at. But I would like to get it fixed right since I tend to keep my vehicles a long time.

    So my related questions are four-fold. What material is the top made out of, and is there a specific type of body shop that I should bring it to in order to get fixed? Also are there differences in the trim/weatherstripping between the C5 model years, and how easy is it to obtain and replace the weatherstripping?

    - Wisdom

  2. #2
    Wisdom
    Guest

    Default

    ttt - I know the topic question is probably a silly question to ask, especially to a forum full of car experts - but I have never had to have body work done on a vehicle part before. If I knew what I needed to be looking for, then I wouldn't be asking the question.

    On the other hand, ask me about the Space Station or computers and we can talk!

    - Wisdom

  3. #3
    drags1998
    Guest

    Default

    I feel that the only silly question is the one that isnt asked, The top is some sort of fiber glass or f.g.reinforced plastic. Ask around your area for body shops,Not sure about diff. trims, but I think they are all the same!! weather strips at any chevy dealer or aftermarket supplier, Good Luck!! Oh, by the way, We are only 1/2 full of experts!!!!!! YOU figure out which 1/2 Haaaaaaaaa!!!

  4. #4
    Wisdom
    Guest

    Default

    Thanks drags1998, I'm not sure if the C5's were fiberglass or some other molded composite or epoxy. I suspect that they are more of the epoxy than anything else. The same with the top. That's why I'm not sure if there's a special process that needs to be followed to add material to a corner. Looks like I'll just look around for a busy bodyshop...


    Thanks,

    - Wisdom

Similar Threads

  1. What to do with a Coupe's solid top thats still in Factory Plastic?
    By Rain in forum C4 Technical and Performance
    Replies: 9
    Last Post: 05-19-03, 10:37 PM
  2. I have a question about painting a Targa top
    By 97moneypit in forum Care & Detailing
    Replies: 0
    Last Post: 01-13-03, 07:24 PM
  3. Cracked Targa Top 1987 Coupe
    By Alfonso Gomez in forum C4 Technical and Performance
    Replies: 3
    Last Post: 10-13-02, 12:33 PM
  4. Targa top
    By showtime in forum Care & Detailing
    Replies: 8
    Last Post: 03-25-02, 12:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •