$projecthp
  • Jump A&B or A&G on the 93 ALCU ?
  • Jump A&B or A&G on the 93 ALCU ?
  • Jump A&B or A&G on the 93 ALCU ?
  • Jump A&B or A&G on the 93 ALCU ?

Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Aug 2006
    Location
    S-NJ
    Posts
    331
    Corvette(s)
    93 Ruby Aniv roadster/6spd
    Post Thanks / Like
    Rides
    0

    Default Jump A&B or A&G on the 93 ALCU ?

    I did some overzealous driving the other day,nothing new for me tho. Now I have the ABS & the EARLY TRACTION CONTROL & SYM lights on. I want to pull the codes but after doing a few searches I get conflicting info. I made some jumper wires in work yesterday to avoid the paper clip or just shoven a wire in there. Thanks.

    BTW, its the ALDL but I cant edit the Title.





    i
    Last edited by Wayback; 05-24-19 at 03:51 AM. Reason: its the ALCL HIT WRONG KEY AGAIN
    Currently 93 Ruby 40th Anniversary Roadster/6 SPD

    Previous 58,68,70,76,78,85,90

  2. #2
    New Member
    Join Date
    May 2019
    Location
    Blauvelt
    Posts
    5
    Corvette(s)
    1989 bright red, MN6, Vert; 1988 35th Anni.
    Post Thanks / Like
    Rides
    0

    Default

    If your '93 has an OBD 1 ALDL jumper pins A & B (two upper right) to get the SES codes flashing.
    If it's OBD 2 you will need to use a scan tool.

  3. #3
    Member LLC5's Avatar
    Join Date
    Sep 2004
    Location
    Wa.
    Posts
    2,299
    Corvette(s)
    98 black 6spd convert.
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by Wayback View Post
    I did some overzealous driving the other day,nothing new for me tho. Now I have the ABS & the EARLY TRACTION CONTROL & SYM lights on. I want to pull the codes but after doing a few searches I get conflicting info. I made some jumper wires in work yesterday to avoid the paper clip or just shoven a wire in there. Thanks.

    BTW, its the ALDL but I cant edit the Title.





    i

    ALCL is correct also.

    Assembly Line Data Link or Assembly Line Communications Link.
    Master Technician

    25+ year ASE Master Certified Tech

    22+ year Honda Master Tech
    Likes JAGwinn liked this post

  4. #4
    Member
    Join Date
    Aug 2006
    Location
    S-NJ
    Posts
    331
    Corvette(s)
    93 Ruby Aniv roadster/6spd
    Post Thanks / Like
    Rides
    0

    Default

    Thanks guys,I did some research & came up with this link.
    C4 Diagnostic Trouble Codes | CC Tech
    Acording to that is A&G. In my old 85 it was A&B . I havent done it yet,Life gets in the way thing.I drove it last week & the lights did not appear.It may be stored in the Memory.
    Currently 93 Ruby 40th Anniversary Roadster/6 SPD

    Previous 58,68,70,76,78,85,90

  5. #5
    Technical Writer for Internet & Print Media
    Join Date
    Jan 2001
    Location
    CenCoast CA
    Posts
    11,949
    Corvette(s)
    71 04 12 19
    Post Thanks / Like
    Rides
    0

    Default

    To get ABS/TCS fault codes, ground to pin G of the DLC.

    To read the codes, you need either a Tech 1 with the appropriate software or use "CCM diagnostics. The 93 EBTCM does not display fault codes by flashing the ABS Service light. If you have the T1 then read the manual on how to use it.

    To read fault codes with CCM diagnostics...

    Ground pin G of the DLC
    Key on, engine off
    The CCM will begin to auto display fault codes for most controllers on the car using the speed display in the IP cluster. It does this by modes and you want to watch for codes in mode 9.1 which is the EBTCM.

    To clear codes:
    press "trip/reset" button the DIC until mode 9.0 appears on the trip monitor part of the IP cluster
    pess and hold the "trip/odo" button on the DIC until 9.7 shows in the trip monitor
    press and hold the "eng/met" button on the DIC until " - - -" shows on the speed display on the IP cluster
    key off
    key back on, engine off
    verify codes are cleared
    key off
    remove the G to ground jumper

    For more information on this, there is a long section in the factory service manual on CCM diagnostics.

  6. #6
    Member
    Join Date
    Aug 2006
    Location
    S-NJ
    Posts
    331
    Corvette(s)
    93 Ruby Aniv roadster/6spd
    Post Thanks / Like
    Rides
    0

    Default

    Thanks Hib. Ill give it a shot this weekend & see what I come up with.This is another new learning process for me on this 93.
    Currently 93 Ruby 40th Anniversary Roadster/6 SPD

    Previous 58,68,70,76,78,85,90

Similar Threads

  1. Jump Start
    By Vette66AirCoupe in forum C1 & C2 General and Technical Discussion
    Replies: 2
    Last Post: 04-20-08, 01:01 PM
  2. save me before I jump ...
    By 65-to-00 in forum C1 & C2 General and Technical Discussion
    Replies: 11
    Last Post: 03-26-06, 12:29 PM
  3. Jump Starting 97 C5
    By smsahl in forum C5 General Discussion
    Replies: 8
    Last Post: 02-10-05, 05:05 PM
  4. possible to jump?
    By sothpaw in forum C4 Technical and Performance
    Replies: 18
    Last Post: 03-08-03, 08:29 AM
  5. Jump Starting
    By Timbalero in forum C4 Technical and Performance
    Replies: 2
    Last Post: 02-18-03, 10:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •