$projecthp
  • T10's from Fuel Pressure Regulator.... Need to replace
  • T10's from Fuel Pressure Regulator.... Need to replace
  • T10's from Fuel Pressure Regulator.... Need to replace
  • T10's from Fuel Pressure Regulator.... Need to replace

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Nov 2016
    Location
    Lansing, MI
    Posts
    19
    Corvette(s)
    1988 35th Anniversary
    Post Thanks / Like
    Rides
    0

    Default T10's from Fuel Pressure Regulator.... Need to replace

    Just picked up a basket case 1988 C4 with the fuel pressure regulator pulled out. Of course there are no T10's to put it back in.
    Any suggestions on replacements?

    Thanks!

  2. #2
    Member DonB's Avatar
    Join Date
    Mar 2015
    Location
    Chicago
    Posts
    339
    Corvette(s)
    2019 ZO6 in Elkhart Lake Blue
    Post Thanks / Like
    Rides
    0

    Default

    The T10 tamper-proof screws are about 3/8" long. You can probably get them at Home Depot or the like. Also Google T10 screws. They don't have to be tamper proof. There's a lot of them on E-Bay too.

    If the regulator is suspect(to be bad) check out Corvette Central (.com) and replace the whole assembly with an adjustable regulator. Part # 304570 Here's a link.
    http://www.parts123.com/corvettecent...50W&ukey=30471

    Tip: When assembling the fuel regulator, do NOT pull the cover down tight to the base with the screws. You will rip the regulator membrane. Clamp the regulator together, then install the screws.

    Good Luck.

  3. #3
    Member
    Join Date
    Nov 2016
    Location
    Lansing, MI
    Posts
    19
    Corvette(s)
    1988 35th Anniversary
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by DonB View Post
    The T10 tamper-proof screws are about 3/8" long. You can probably get them at Home Depot or the like. Also Google T10 screws. They don't have to be tamper proof. There's a lot of them on E-Bay too.

    If the regulator is suspect(to be bad) check out Corvette Central (.com) and replace the whole assembly with an adjustable regulator. Part # 304570 Here's a link.
    http://www.parts123.com/corvettecent...50W&ukey=30471

    Tip: When assembling the fuel regulator, do NOT pull the cover down tight to the base with the screws. You will rip the regulator membrane. Clamp the regulator together, then install the screws.

    Good Luck.
    Thanks! Do you recall if there are washers on the fasteners?

  4. #4
    Member DonB's Avatar
    Join Date
    Mar 2015
    Location
    Chicago
    Posts
    339
    Corvette(s)
    2019 ZO6 in Elkhart Lake Blue
    Post Thanks / Like
    Rides
    0

    Default

    No washers. Just screws.

    Sent from my SAMSUNG-SM-G900A using Tapatalk

Similar Threads

  1. Fuel Pressure Regulator '90
    By scotch1 in forum C4 Parts For Sale / Wanted
    Replies: 0
    Last Post: 01-23-11, 11:18 AM
  2. Replace Fuel Regulator Instructions Please??
    By DallasK in forum C4 Technical and Performance
    Replies: 11
    Last Post: 04-20-09, 07:55 PM
  3. Fuel Pressure Regulator
    By scotch1 in forum C4 Technical and Performance
    Replies: 3
    Last Post: 04-05-07, 07:04 PM
  4. Fuel Pressure Regulator
    By PLRX in forum C4 Technical and Performance
    Replies: 5
    Last Post: 07-27-05, 07:26 AM
  5. Fuel Pressure regulator AGAIN!
    By 94Roadster in forum C4 Technical and Performance
    Replies: 7
    Last Post: 08-27-03, 02:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •