• End Link Bushings in Lwr Control Arm
  • End Link Bushings in Lwr Control Arm
  • End Link Bushings in Lwr Control Arm
  • End Link Bushings in Lwr Control Arm

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Apr 2009
    Location
    Phoenix
    Posts
    3
    Corvette(s)
    1957 RestoMod, LS1, C4 Chassis
    Post Thanks / Like
    Rides
    0

    Default End Link Bushings in Lwr Control Arm

    Does anyone have diameter specs on the sway bar end link bushings? I bought a 1996 GS front end from a salvage yard. At least they said it was a GS.
    The end link bushing sleeve in the lower control arm is 21mm diameter. But the GM dealer and Energy Suspension only have 25mm diameter bushings - and pressing them in is impossible.

    Did the '96 year have different control arms? Did the GS have smaller end link castings? If so, where can I find correct bushings? Any help is appreciated.

  2. #2
    Member
    Join Date
    Jan 2004
    Location
    Not in Kansa anymore
    Posts
    1,560
    Corvette(s)
    1990
    Post Thanks / Like
    Rides
    0

    Default

    They only list one bottom arm for 88-96 .
    Just measured my '90 ones for you and the hole in the arm is 22mm.

  3. #3
    New Member
    Join Date
    Apr 2009
    Location
    Phoenix
    Posts
    3
    Corvette(s)
    1957 RestoMod, LS1, C4 Chassis
    Post Thanks / Like
    Rides
    0

    Default

    Thanks. That tells me the direction I need to take.

Similar Threads

  1. A arm bushings
    By SteveL in forum C3 Technical and Performance
    Replies: 1
    Last Post: 10-15-03, 05:03 AM
  2. Changing rear spring end link bushings
    By Larry82 in forum C3 Technical and Performance
    Replies: 1
    Last Post: 05-15-02, 03:24 PM
  3. Pressing PST Bushings into Control Arms
    By RizzoRat in forum C3 Technical and Performance
    Replies: 4
    Last Post: 04-14-02, 02:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •