Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: 90 coupe

  1. #1
    Member
    Join Date
    Nov 2006
    Location
    north carolina
    Posts
    22
    Post Thanks / Like
    Rides
    0

    Default 90 coupe

    hi! my mechanic at the dealership says my 90 vette needs a ccm computer,but the item is not available. does anyone know where i might purchase one?---thanks---john

  2. #2
    Member Dustoff529's Avatar
    Join Date
    Dec 2008
    Location
    Bethlehem, GA.
    Posts
    170
    Post Thanks / Like
    Rides
    0

  3. #3
    Member
    Join Date
    Nov 2006
    Location
    north carolina
    Posts
    22
    Post Thanks / Like
    Rides
    0

    Default 90 coupe

    thanks for your reply charlie! i believe there is a difference in the ecm and the ccm computers.the ecm seems to be alright. the ccm,which is located under the center dash is the one i am looking for.none of the catalog suppliers has this part.so i guess a salvage supplier will be my next hunt.--thanks again tho!!---john

  4. #4
    Member Dustoff529's Avatar
    Join Date
    Dec 2008
    Location
    Bethlehem, GA.
    Posts
    170
    Post Thanks / Like
    Rides
    0

    Default

    Blushing! Should have known that!!! I googled around.. not much, ??ECklers, Ebay? Corvettte central??
    Charlie

  5. #5
    Member gw962's Avatar
    Join Date
    Dec 2006
    Location
    Oklahoma
    Posts
    52
    Post Thanks / Like
    Rides
    0

    Default

    Not that I doubt the abilities of your mechanic, but have you checked for codes to verify? It's really pretty simple to do. You can post any codes that display for help.
    I thought I had a bad CCM(VATS issue) last summer, but it turned out to be a loose connector that plugged in to the back of the unit.
    If I remember correctly, CARDONE remans these, so you might check there.

  6. #6
    Member
    Join Date
    Apr 2006
    Location
    south florida
    Posts
    403
    Post Thanks / Like
    Rides
    0

    Default

    Another place I've heard of that rebuilds CCM's is vette2vette, but as mentioned be sure it is really needed, good luck.

  7. #7
    Member
    Join Date
    Jan 2004
    Location
    Not in Kansa anymore
    Posts
    1,560
    Post Thanks / Like
    Rides
    0

    Default

    Very hard to come by apparently .Has to be correct for MY.
    New one FS on Corvette Forum a while back @ $325; stated dealer price was over $500
    Email me the # off the CCM
    I can't remember if I sold the '90 CCM or the SIR box back to the US. Have to check my "spare parts" dept , you might be in luck
    vetteoz@optusnet.com.au

  8. #8
    Member
    Join Date
    Nov 2006
    Location
    north carolina
    Posts
    22
    Post Thanks / Like
    Rides
    0

    Default ccm for 90

    thanks for your input guys! i found a rebuilt one at NAPA,ordered it,hope it works!---john

Similar Threads

  1. C5 vs. C6 comparison--Coupes and Z06s
    By Gersh in forum C6 General Discussion
    Replies: 14
    Last Post: 07-07-08, 06:26 AM
  2. '90 coupe carfax
    By bertsbassbox in forum C4 General Discussion
    Replies: 4
    Last Post: 04-13-08, 10:35 AM
  3. '90 coupe low voltage
    By bertsbassbox in forum C4 General Discussion
    Replies: 3
    Last Post: 04-12-08, 02:27 PM
  4. will 96 camaro wheels fit my 90 coupe?
    By bertsbassbox in forum C4 Technical and Performance
    Replies: 1
    Last Post: 08-07-06, 04:03 AM
  5. rear defrost on 90 coupe
    By bertsbassbox in forum C4 Technical and Performance
    Replies: 1
    Last Post: 08-05-06, 12:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •