• Finally! Drivers side wires off! But . . . . . ?
  • Finally! Drivers side wires off! But . . . . . ?
  • Finally! Drivers side wires off! But . . . . . ?
  • Finally! Drivers side wires off! But . . . . . ?

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Member Donne Trav's Avatar
    Join Date
    May 2008
    Location
    Washington, DC
    Posts
    261
    Corvette(s)
    1994 Blk/Blk
    Post Thanks / Like
    Rides
    0

    Default Finally! Drivers side wires off! But . . . . . ?

    After all the struggle and another trip to an auto parts place for a tool
    that I thought would help (an 11" set of needle nose pliers) with 2 of the 4 having 2 different angles at the end. Wow, I knew one of these was going to work. The first 2 from the bottom —from underneath the car— were easy enough. Still working from under the vehicle, I was unabe to get a good grip with either one of the 11" needle noses on the next 2. I'm starting to get really "salty" now. Then, suddenly I yanked on the next wire, which was being held together with that "core" piece that is in the center of these wires. "Pop!. Wire/boot off! Same on the last one, "pop"—off! But, in my tantrum, I realized I had not marked either end of the old wires. So now I'll be seeking info on matching the new wires from the Opti to the to the plugs. Hopefully, that info will be in the "94 GM Service Manuals" I recently purchased on E-bay. Now, to get them to "Pop" on as easily. All of you were a BIG help as usual. THANKS

  2. #2
    Member
    Join Date
    Apr 2006
    Location
    south florida
    Posts
    403
    Corvette(s)
    1993 Coupe, Bright Aqua
    Post Thanks / Like
    Rides
    0

    Default

    This should help



    use a little dielectric grease on the wire ends. Stick with it Donny you will get it.

  3. #3
    Member Donne Trav's Avatar
    Join Date
    May 2008
    Location
    Washington, DC
    Posts
    261
    Corvette(s)
    1994 Blk/Blk
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by toptechx6 View Post
    This should help



    use a little dielectric grease on the wire ends. Stick with it Donny you will get it.
    Thankyou, TopTech. Very nice diagram.

Similar Threads

  1. Installed Silverstar headlights
    By TheSearcher in forum C5 General Discussion
    Replies: 24
    Last Post: 04-22-07, 07:20 PM
  2. Vaccum leak comming from under dash on drivers side
    By tx73vette in forum C3 Technical and Performance
    Replies: 4
    Last Post: 04-19-05, 08:55 AM
  3. Alarm install - this ain't goin' well.
    By keefyboy in forum C4 Technical and Performance
    Replies: 8
    Last Post: 12-01-03, 10:25 PM
  4. Need drivers side rearview mirror for my 84
    By elkabong in forum C4 Technical and Performance
    Replies: 2
    Last Post: 05-07-03, 05:18 PM
  5. Drivers side mirror
    By James Lopez in forum C5 Technical and Performance
    Replies: 1
    Last Post: 04-13-03, 05:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •