$projecthp
  • Washer Hose Clip on LH Wiper Arm?
  • Washer Hose Clip on LH Wiper Arm?
  • Washer Hose Clip on LH Wiper Arm?
  • Washer Hose Clip on LH Wiper Arm?

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Nov 2002
    Location
    CST
    Posts
    324
    Corvette(s)
    96Cpe
    Post Thanks / Like
    Rides
    0

    Default Washer Hose Clip on LH Wiper Arm?

    On a late C4 (95-96) I noticed that the rubber washer tube is pinching under the left (drivers) arm when it is off/parked and resting against the plastic 'rest' at the base of the antenna. This is about 6 inches up from the base of the arm - the arm is just flat metal with a tiny hole. The hole is where I think the plastic 'clip' of some sort was supposed to have gone. And the clip would I believe normally rest against teh rest or stop.

    I've looked at several of the larger Corvette sellers sites but no joy.

    Anybody know of a GM part# (if it was ever avail by itself) or where I can source one of these washer hose clips for a 95/96 wiper arm?

    Thanks

  2. #2
    Member
    Join Date
    Nov 2002
    Location
    CST
    Posts
    324
    Corvette(s)
    96Cpe
    Post Thanks / Like
    Rides
    0

    Default

    Here's some pix of what I was talking about. First one shows where the clip/protector was and the other shows the other wiper arm w/ the clip/protector in place.

    I'm looking for a part # or source for replacement clip(s) or even just it's 'official' name might help. Thanks



  3. #3
    Member WhalePirot's Avatar
    Join Date
    May 2002
    Location
    SoCA
    Posts
    2,943
    Corvette(s)
    1984 White Z-51/ZF6-40/Shinoda body
    Post Thanks / Like
    Rides
    0

    Default

    Quote Originally Posted by pgtr View Post
    .....no joy.
    As opposed to 'tally ho'?

    This is a pair of pics from my car.

    I found it, I think, as part of a new arm @ a Corvette parts place. Check this pic, as large as you can make it. http://www.corvettepartscatalog.com/...ducts_id=11607

    GM diagram, does not break the part out separately.
    http://www.gmpartsdirect.com/catalog/frameset.cfm

  4. #4
    Member
    Join Date
    Nov 2002
    Location
    CST
    Posts
    324
    Corvette(s)
    96Cpe
    Post Thanks / Like
    Rides
    0

    Default

    Thanks for the reply. So it sounds like these plastic clips are N/A short of buying an entirely new arm.

    Well I guess I'll just live without it unless I run across a parts car (maybe another GM w/ a similar wiper arm arrangement).

    Thanks again

  5. #5
    Registered User B17Crew's Avatar
    Join Date
    Oct 2002
    Location
    Columbus, Ohio
    Posts
    1,611
    Corvette(s)
    96 LT4 Polo Green/Light Beige Interior
    Post Thanks / Like
    Rides
    0

    Default

    Iíve had great results using a Corvette salvage company. I have used Taber Corvette Parts several times and each time the parts I received were in good condition.

    Link to Taber Corvette Parts:
    http://www.tabercorvetteparts.com/index.html

    You may want to contact them. I've emailed them pictures of the parts I need and have had great results. The images you posted would be a good reference for a go-by.

    Good luck and let us know if you find the part!

    B17Crew

Similar Threads

  1. WTB complete LH trailing arm in So Cal
    By chevygod in forum C3 Parts For Sale / Wanted
    Replies: 2
    Last Post: 04-16-07, 11:04 AM
  2. Interesting GM Patents
    By Runge_Kutta in forum C6 Technical and Performance
    Replies: 12
    Last Post: 10-05-04, 04:29 PM
  3. 73 washer hose
    By eastnder in forum C3 Technical and Performance
    Replies: 0
    Last Post: 02-17-02, 08:53 PM
  4. Windshield washer hose routing w/AC
    By ssvett in forum C3 Technical and Performance
    Replies: 6
    Last Post: 08-27-01, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •