$projecthp
Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Dec 2009
    Location
    olive branch
    Posts
    3
    Post Thanks / Like
    Rides
    0

    Default 1991 ZR-1 368 cubic inch

    Selling 1991 Corvette ZR-1. Car has 27,800 miles. Great car and fun to drive. The car idles and runs like a stock ZR-1. It has a 368 cubic inch motor with polished cam covers and intake plenum all aluminum parts have been polished to enhance the appeal when you open the hood. This car has many upgrades, ported and port matched heads/injector housings/plenum, 63mm dual-throttle body, new injectors, Jeal headers, three-inch B&B stainless exhaust, Hurst Billet Plus shifter. Coil over shocks on the front, ZFdoc blueprinted 6 speed transmission. Spec pressure plate, Kevlar Disk, balanced drive shaft, new spicer u-joints everywhere. New 3:72 gears and new seals in the differential. C5 Brakes and rotors on the front, stainless lines, and polyurethane bushings all around... the chassis is stock.
    It made 442 RWHP on pump gas! (442hp with 18% loss = 545 crank hp) WITH STOCK CAMS!

    The Floor and rear compartment covered with a sound deadening/thermal barrier material. '96 Collector Edition seats recovered by Mark's Custom Upholstery in Converse, Texas. The black seats with special red stitching and custom red ZR-1 logo on the headrest really sets off the interior.
    The original wheels were replaced with polished late-model five-spoke ZR-1 wheels. I have more pictures if needed. $25,000


    This car has so many upgrades, if you're interested call me and I can tell you the rest. 901-573-3406

    The only reason I'm selling it is I've bought a 1967 BB Corvette Coupe I've been wanting for years.

    Thanks,
    Randy
    Attached Thumbnails Attached Thumbnails screen-shot-2016-09-08-10-21-10-am-jpg   screen-shot-2016-09-08-10-20-40-am-jpg   screen-shot-2016-09-08-10-20-52-am-jpg   screen-shot-2016-09-08-10-20-26-am-jpg  
    Likes Tom Bryant, GRANDSPORT liked this post

  2. #2
    Moderator Toms007's Avatar
    Join Date
    Sep 2004
    Location
    Southwest Kansas
    Posts
    6,245
    Corvette(s)
    2007 Atomic Orange Coupe
    Post Thanks / Like
    Rides
    2

    Default

    Sweet ride, Randy! Good luck with your finding a new home for this very nice 91.
    2007 Atomic Orange Coupe Cashmere/black interior

    2005 CruiseFest Attendee (Bowling Green, KY) 2007 CruiseFest Attendee (Colorado Springs, CO)
    2008 CruiseFest Attendee (Cleveland, OH)
    2010 Cruisefest Attendee(Effingham, IL)
    2011 CruiseFest Attendee(Effingham
    , IL)

    Formerly owned Corvettes: 1964 coupe, 1994 coupe, 2001 coupe


Similar Threads

  1. Artwork of a 572 cubic inch big block c6 *if I had the money*
    By GO_VETTE in forum C6 General Discussion
    Replies: 0
    Last Post: 02-10-09, 03:35 AM
  2. WTB 17 inch wheels for a '73
    By lone73 in forum C3 Parts For Sale / Wanted
    Replies: 0
    Last Post: 10-24-03, 08:33 PM
  3. 18 inch rims
    By CLABORN1960 in forum C4 Technical and Performance
    Replies: 28
    Last Post: 06-28-03, 01:28 PM
  4. Front Drive, 6 cubic inch 1996 Corvette for Sale
    By Lahodny in forum C4 Technical and Performance
    Replies: 3
    Last Post: 06-03-03, 11:49 PM
  5. How to make more cubic inches
    By 400hp_76 in forum C3 Technical and Performance
    Replies: 13
    Last Post: 04-24-02, 08:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •