$projecthp
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: SEATS

  1. #1
    TIM
    Guest

    Default

    I HAVE A 1980 L82 VETT, AND NEED SOME HELP ON INSTILATION FOR MY NEW SEATS. I SEE THAT IN THE FOAM THERE IS A BAR RUNNING THRU. DOES ANYONE HAVE ANY IDEAS ON HOW THE OLD SEATS SEPERATE FROM THE CLIP. ANY HELP WOULD BE GREAT.

    THANKS TIM

  2. #2
    ssvett
    Guest

    Default

    Tim, I'd really like to help you, but it is very dificult to tell you by typeing. I can put it in one small statement though.......It's a PITA!!!! You have to almost fold the cushion in half to get the new ones in, as far as getting the old ones out, just carfully take a large plat tip screwdriver and pry the bar over(to the center of the cushion) and out from under the tabs. The new ones you usually have to cut away part of the foam so you can see the bars, and then pry them out of the foam. With two large screwdrivers, pry the bar out with one and push the bar under the tab with the other. Having help with this is very helpful, and maybe a couple of 6 packs.......Good luck.....Steve

Similar Threads

  1. Seats
    By jake167victoria in forum C4 General Discussion
    Replies: 2
    Last Post: 09-27-04, 03:02 PM
  2. C4 power seats?
    By Last Ride in forum C3 Technical and Performance
    Replies: 5
    Last Post: 01-12-04, 12:56 PM
  3. 92 sport seats in a 84?
    By ffvetteman in forum C4 Technical and Performance
    Replies: 0
    Last Post: 09-14-03, 05:37 PM
  4. newer camaro seats in 77???
    By BORDERBUM in forum C3 Technical and Performance
    Replies: 2
    Last Post: 01-23-03, 08:59 AM
  5. New Seats Help!
    By BigRed in forum C4 Technical and Performance
    Replies: 4
    Last Post: 02-11-02, 01:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •