$projecthp
Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Moderator KANE's Avatar
    Join Date
    Mar 2002
    Location
    KY
    Posts
    3,241
    Corvette(s)
    Dark Blue 1982 Trans Am(s): Polo Green 1995 MN6
    Post Thanks / Like
    Rides
    1

    Default 4.7 Second Crossfire 1982 Corvette

    I haven't posted about my 82 in a while.

    • This car has been in my family since the 1980s. It was my father's and he taught me how to drive... with it! I have so many memories of riding around with him in that car. When I was a teenager, he let me take it to a few school dances, on a few dates, and I was even able to get it out for a few rare, special occasions by myself.
    • When he retired, he gave the car to me with one condition: He asked that I keep "the look" of the car and to keep it looking "factory". So, nothing crazy like flares, blowers, repaints in crazy colors, etc. I remember asking "Hey dad- what about a bigger cam? Does that change the look?" His response was "No, that doesn't change the way it looks." I asked about things like the rear end... the intake... things like that because the CFI system wasn't exactly a high performance EFI platform by any means.
    • That led to the idea that I wanted to keep it looking like it was a CFI car... but in reality was ANYTHING but factory in how it performed.


    I've changed a lot- but kept it more or less faithful to the request my dad made to "keep it looking like it did from the factory". I've taken a lot of license with that phrase- but what I've ended up with an engine that wears it's OE air filters and OE throttle bodies bored out from 46mm to 52mm. After that- EVERYTHING is different from the fuel lines to the fuel pump and from the intake to the dual exhaust.

    It's still the same color as it was in the 80s- but the wheels have been upgraded to 17" aluminum wheels that have 8 slots, similar to the OE aluminum wheels.

    The car runs excellent. Starts up easily, runs 14.7 : 1 AFR in cruise mode and 12.2 : 1 in wide open throttle. It transitions perfectly between the two modes effortlessly. It has almost .500" of lift on the cam and 90lb injectors with almost 30psi on the system. The custom weighted governor shifts the car out of gear at 5600 - 5700 rpm out of each and every gear at wide open throttle, making it an automatic with no compromises to how it runs.

    It also has a documented 4.7 second 0-60mph time using the datalogging software with its EBL Flash ECM.

    Here's the summary of the mods:

    - OE TBI units bored out to 52mm running in parallel port fueling configuration
    - Renegade Intake (aftermarket cross ram)
    - 90lb injectors
    - Aeromotive Variable Fuel Pressure Regulator (25psi at idle / 28psi at WOT)
    - Davis Unified Ignition distributor, coil, and module
    - MSD Digital 6A capacitative discharge system
    - AFR Eliminator 180 heads w/ 65cc chambers (equipped with hyd. flat tappet springs)
    - Aluminum radiator and high flow water pump
    - Erson cam with .496” / .495” lift, 224/234 @ .05, 112 LS
    - Hooker full length headers
    - Dynamic EFI EBL Flash ECM with 8 position flash programmable memory, integrated wide band O2 sensor, and USB compatible
    - 1985 Corvette Electronic Spark Control module conversion
    - True duals, H-pipe, with Magnaflow mufflers
    - 2k RPM stall converter
    - Built 700R4
    - 3.73 Yukon ring & pinion gears
    - 17” American Racing VF-503 wheels with 255/50/17W tires
    - Custom 140mph speedometer and custom redline tachometer with 1982 Corvette crossed flags
    - LED gauge lamp conversion
    - Halogen H4 four lamp conversion
    - Restored interior
    - Show quality repaint


    So how does it run?
    It is a lot of fun to drive! It's throttle response is amazing- when you drop the pedal, it just takes off like a rocket.

    The video link has some footage of its idle, revving the engine, stand still acceleration, rolling start acceleration, and Kentucky Speedway at 120mph.


    YouTube
    Attached Thumbnails Attached Thumbnails img_3203-jpg  
    1982 Dark Blue Corvette
    Crossfire Injection | .496"/.495" Cam | AFR Eliminator Heads | EBL | 3.73

    Likes gmjunkie, Tom Bryant, bill81vette liked this post
    1982 Chevrolet Corvette , 350 2k RPM Stall Converter + Updgraded Transmission + Governor Set For 5,450rpm Shifts 3.73 Code 42 Dark Mettalic Blue with a twist

  2. #2
    Administrator Tom Bryant's Avatar
    Join Date
    Nov 2000
    Location
    Edgerton, Ohio, United States
    Posts
    7,157
    Corvette(s)
    1959 black 270hp (9/2/69) 1981 Beige L81(10/20/80)
    Post Thanks / Like
    Rides
    2

    Default

    Love the video.
    NCRS 1360.............SACC 2082.............C1 Registry..............L81 Registry
    1959 Chevrolet Corvette 1981 Chevrolet Corvette , 350 L81 automatic Frost Beige

  3. #3
    Member douglasamariani's Avatar
    Join Date
    May 2008
    Location
    Anaheim Hills CA.
    Posts
    167
    Corvette(s)
    2008 6.2 Coupe,1980 L48 Coupe,1968 427/4spd Coupe
    Post Thanks / Like
    Rides
    0

    Default

    Very nice

Similar Threads

  1. 1982 crossfire
    By jimbil208 in forum C3 Technical and Performance
    Replies: 7
    Last Post: 06-20-16, 02:21 AM
  2. 1982 crossfire
    By jimbil208 in forum C3 Technical and Performance
    Replies: 1
    Last Post: 09-11-15, 06:30 AM
  3. Help! 1982 crossfire
    By grasshopper in forum C3 Technical and Performance
    Replies: 12
    Last Post: 10-07-12, 05:05 PM
  4. Help! 1982 crossfire
    By pawd19 in forum C3 Technical and Performance
    Replies: 2
    Last Post: 05-06-11, 07:17 PM
  5. 1982 crossfire
    By jimbil208 in forum C3 Technical and Performance
    Replies: 6
    Last Post: 09-11-10, 05:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •