• What next to get half shafts out of this '80?
  • What next to get half shafts out of this '80?
  • What next to get half shafts out of this '80?
  • What next to get half shafts out of this '80?

Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Nov 2018
    Location
    Florida
    Posts
    12
    Post Thanks / Like
    Rides
    0

    Default What next to get half shafts out of this '80?

    I have the straps off the joints, what do you suggest as the next step in getting them out? What else needs to be disconnected? I've heard some say the strut rods don't need to come out but I don't see how that could be. Below are pics of my setup.

    Thanks.

    corvette-rear-below-jpgcorvette-rear-above-jpg

  2. #2
    Member douglasamariani's Avatar
    Join Date
    May 2008
    Location
    Anaheim Hills CA.
    Posts
    116
    Corvette(s)
    2008 6.2 Coupe,1980 L48 Coupe,1968 427/4spd Coupe
    Post Thanks / Like
    Rides
    0

    Default

    If you have the straps off the U joints than just put a pry bar between the Half shaft and the yoke and pry the half shaft into the differential and it should release.
    Likes Vettehead Mikey liked this post

Similar Threads

  1. Half Shafts
    By Bob Chadwick in forum C3 General Discussion
    Replies: 41
    Last Post: 11-01-04, 09:25 AM
  2. Half Shafts
    By matchframe in forum C3 Technical and Performance
    Replies: 2
    Last Post: 05-11-03, 07:53 PM
  3. Purchasing drive shafts and half shafts
    By IH2LOSE in forum C1 & C2 General and Technical Discussion
    Replies: 6
    Last Post: 05-07-03, 07:43 PM
  4. Replacement of universal joints in half shafts and drive shafts
    By John 1 in forum C3 Technical and Performance
    Replies: 4
    Last Post: 02-16-02, 11:35 AM
  5. half shafts
    By mga in forum C3 Technical and Performance
    Replies: 4
    Last Post: 09-10-01, 07:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •