$projecthp
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Site Administrator Rob's Avatar
    Join Date
    Sep 2000
    Location
    "Manchestah" NH
    Posts
    13,370
    Corvette(s)
    1990 ZR-1 - Bright Red / Black
    Post Thanks / Like
    Rides
    1

    Default [Bowling Green News - 6-21-04] Paint Set For Major Renovations

    From the Bowling Green Performance Press:

    Paint Set For Major Renovations
    By Emily Gries

    A number of changes will be made to the paint shop prior to and during the down time. These changes and improvements to equipment are needed to get ready for the C6 model and to ensure paint consistency and quality of finish, said plant facilities administrator Charlie Gries.

    All of the carriers in the main paint system will be replaced with C6 carriers. About 350 of the C6 carriers are being stored outside the plant and will be swapped out with the C5 carriers during or prior to the shutdown.

    Starting at body wash, additional shields will be installed to prevent oil from the conveyer getting on to the paint jobs.

    Condensation has been building up in the ceiling area between body wash and the oven, so that area will be replaced with insulated panels to prevent any further condensation.

    Many robots in the paint facility need improvements. The controls on the feather duster robots ahead of prime and color will be upgraded to allow better programming capabilities. The paint robot controls will be improved to have better fault alarms. Blackout robot controls and equipment will also be upgraded.

    First color booth will undergo a major renovation, the main concern being improved air quality. Air vents on the ceiling of the booth will be widened to help increase air flow. The paint booth airhouses located above the paint booths will also be renovated, which includes replacing the mist eliminators, which remove moisture from the humidifier coils.

    The airhouses will be cleaned, the piping and fans will be painted and the doors will be replaced. New doors will also be added to the clear booth to help maintain air balance.

    A more visible change will be the many painted panel storage racks and delivery carts which will be modified or replaced with C6 carts and racks. Also, two new KARDEX units will be installed for additional fender storage because the C6 fenders are much wider than the C5 fenders and take up more storage space.

    Finally, the controls on the paint circulating systems will be replaced so paint temperatures can be monitored and controlled from the control panels at each booth.

    The paint shop improvements are being driven by the need to improve the paint quality level on both the XLR and the new Corvette.

    By better monitoring and control of everything that affects the paint application process, we can get more consistent quality.

    The corporation is funding projects, Gries said, in order to give us the tools we need to produce the best possible paint quality for our customers.


    Rob Loszewski, Owner & Site Administrator
    Corvette Action Center

    Cadillac V-Net
    Cadillac XLR Net
    Torque About It
    Torque Network
    VetteTube
    NCRS Member #27792
    "Let your plans be dark and impenetrable as night, and when you move, fall like a thunderbolt." - Sun Tzu

    Supporting Membership - Supporting Vendors / Dealers - Advertising Information
    1990 Chevrolet Corvette ZR-1 , 350 Stock ZF 6-speed. Stock Bright Red

  2. #2
    Gone but not forgotten
    Join Date
    Feb 2003
    Location
    Mt Juliet, TN
    Posts
    531
    Corvette(s)
    2010 ZR1
    Post Thanks / Like
    Rides
    0

    Default

    WOW! Fantastic news, Rob...thanks for sharing with us!

    I have a Machine Silver C6 coupe on order with a TPW of July 26th!

    Zippy

Similar Threads

  1. Question on repairing BABY's paint damage
    By BarryK in forum C1 & C2 General and Technical Discussion
    Replies: 15
    Last Post: 05-09-05, 06:09 PM
  2. [Bowling Green News: 4-9-2004] Bowling Green Welcomes Joe Spielman
    By Rob in forum Bowling Green Assembly Plant / National Corvette Museum News
    Replies: 2
    Last Post: 04-10-04, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •