PDA

View Full Version : Changing out Low Beam Lights



tmdmike
03-22-04, 01:21 PM
I got to the front headlighight bulb area, but it is sure hard to get the light out. I tried turning it, but felt resistance. Is there some trick to this in the C5

John p
03-24-04, 11:58 AM
Keep turning, they tend to stick if they've never been out.

tmdmike
03-28-04, 03:20 AM
Thanks ,,,Going to try it Sunday.

yellow_2002_germany
03-28-04, 06:56 AM
It is a PITA since you have to do it almost all by feel. Just take your time and you should be fine. Resistance is not futile in this case!

tmdmike
03-29-04, 12:21 PM
Hey Thanks...Good advice... Tight workign area, but got them in...THX:beer

devo
04-03-04, 01:58 AM
I have done it 5 times!


you need to push down on the lock and turn it is raised and you can feel it push it down and it will let you turn the socket out