Search:

My condolences. May he RIP.

I will go out on a limb, At rear wheels; 308 h.p. corrected pre-tune, 332 post tune :upthumbs Similar to what my LT4 showed (316 pre - 344 post) after some minor mods and tune. You have better...

Thanx Hib! Was wondering whether 3.54/.55 was even an option in a D44. I had the 3.45 in my LT-4 and was just thinking if I could get a ratio option between that and 3.73. Have ruled out 3.73's...

A couple questions, I race this car on the drag strip 6-10 times a summer, I will be upgrading my rear differential in my 1996 LT-1, auto trans, for a performance upgrade and to handle current and...

Anyone have this installed on your 1996 LT-1 ?? Feedback please :upthumbs:upthumbs:upthumbs http://www.parts123.com/parts123/yb.dll?parta~dyndetail~0000050Q~28814~~~~~~~0000050Q

All four corners with car tie downs, I use "Mac's Ratchet Straps" from Summit Racing, get the set that have the re-inforced center to protect from wear. First the fronts, snug them down firm, then...

I deal with it every winter during storage in the barn. Best solution I found is to set 3-4 traps in the car, check them every week, and re-set them. I put 3 inside the car, and one on top of the...

I called the guy I bought the rims from, H&H Corvette Inc in Florida. They are from a 91-92 ZR. Painted, and have been on the shelf for about 15 years. Sweeet !! :D:D Now I know what to...

96gs, I have a good thing going with my dealer here where I live, I give them a lot of business at their tire shop. I got the 315x35x17 NT555's for $210 ea. which I thought a good deal. I like them...

After 3 years of searching, finally found a set of ZR1 11x17 sawblades and did not cost me an arm and leg ($599) :cool!: Mounted up new Nitto NT555's 315x35x17 rears, I like the look!!:thumb:thumb ...

Thanx Tuna! :w Ended up getting the Nitto NT555's, not much choice for 315's. My 315 Race slicks for the drag strip fit real nice but they are on 9.5's, I know with the 11 inch rim it will be...

Well, it's that time of the year, getting the ol girl ready for summer, just bought a nice set of 11x17 rear sawblades off ebay for $599. Really stoked for them to get here, then putting new "shoes"...

I have/had both the 96 LT1 & 96 LT4 at the same time .......... while we did sell our LT4 it was due to non-automotive reasons. I wil say this BUY THE LT4, you will not be sorry. Keep looking for a...

Congrats, the LT4 is an awesome Corvette, I miss mine :(.

As everyone said, the engine temps are normal in your temperatures. I had a programmer change my fans to come on at 200 degrees just...

Love it!! :cool!:

I just sold my LT4, this was my plate ...............

10082

Our other C4 sez "96 LT1" :w:beer

Boom, you know good and well who gets HER name on the title to the Z06;worship

So good to hear from you, and that the "old performance" posters are still around helping. Your sugggestions are...

Well, went and sold the LT4 a while back, and the wife and I decided her C4 LT1 will now be my race/street car (provided I put the down on a Z06) :woot: Since that will be awhile b4 we can...

Better air in! Power Couplers, MAF housing increase to 1000 cfm, & Air foil for TBI. Fits 94-96 LT-1 & LT-4 motored C4's. Came off my LT4 I recently sold. This is a nice modification that you can...

I installed a SLP intake from mid-america on my LT-4 while we had the car on a chassis dyno. Instant 16 h.p. increase after simply putting it on. I also have the exhaust mufflers deleted, and...

Surpising time, way to go!! Next time, rear tires @ 18 psi, unhook the air compressor, power brake to 1100 rpm, traction control off, tranny in drive not o/d, then Pin er! :D

sold

xx

Looks like I might have sold my LT4 :cry, and already the wheels are turning in my head for a future replacement as a dragstrip/Sunday crusier.

My question is, is there any stock rear axle C3...

58,000 Original Miles, Stock LT-4 motor with an Electronic Dyno tune, 328 RWHP at the rear wheels. Drives like a new car, no squeaks or rattles. 6 spd. Extremely Clean, well maintained. New Optispark...

WOW! :happyanim: What an awesome Tru Blu Corvette for a Tru Blu Corvette man! Congratulations Hib!


As a C4 man, I never cared for the other body styles, but man-o-man these C6's are REALLY...