Half shafts question

[captainrags]

I would like to replace the universal joints on both sides is there any way of doing this with out disturbing the rear wheel aligment?

[Toms01]

Shouldn't have any problems with alignment. I replaced the u-joints and never had any problems.

[Hib Halverson]

You can R&R half-shafts without disturbing the rear camber or toe adjustments.

[surfer93]

Just mark the camber on both sides with a marker, then realign when installing.

Yep, it is that easy.

[captainrags]

Just mark the camber on both sides with a marker, then realign when installing.

Yep, it is that easy.

Thanks all. So i must remove the lower control arm to move the hub away. so marking is surficient?
Thany You