HI there,
1 or 2 possiblities.
Door lock actuator could be lazy.
Door control module could not be supplying voltage or the ground source.
Allthebest, c4c5
remote door lock not working (drivers side only)
the drivers door on my 2004 coupe is not working with the remote or with the unlock button , only works manually with the key, could it be the cold? was 10 degrees this morning, also what if you had a new corvette -they have no key, how whould you get in the car?
HI there,
1 or 2 possiblities.
Door lock actuator could be lazy.
Door control module could not be supplying voltage or the ground source.
Allthebest, c4c5
GM World Class Certified Technician.
Like us: www.facebook.com/corvettemechanic
http://twitter.com/GMvettemechanic
http://thecorvettemechanic.com
Podcast: Itunes, search 'the corvette mechanic'
thanks- I will make a appoitment with my dealer if it does not work properly later today, do you know how you whould get in a c6 if this happened? (no-key)
Yes, there are release handles in the trunk and on both door sills.
Allthebest, c4c5
GM World Class Certified Technician.
Like us: www.facebook.com/corvettemechanic
http://twitter.com/GMvettemechanic
http://thecorvettemechanic.com
Podcast: Itunes, search 'the corvette mechanic'
c4c5,
question on my 04 vert. i've set the locks in the DIC to "unlock" when i shut off but it dosen't unlock the drivers. did i do something wrong? thanks.
j.jam
HI there,
No, I dont think so.
You may also have an issue with either of the above.
When you use the transmitter, do they unlock one for the drivers and 2 for the passenger????
Allthebest, c4c5
GM World Class Certified Technician.
Like us: www.facebook.com/corvettemechanic
http://twitter.com/GMvettemechanic
http://thecorvettemechanic.com
Podcast: Itunes, search 'the corvette mechanic'
c4c5,Originally Posted by c4c5specialist
yes they do unlock with fob. the car has 4,500 miles on it. is this best left to the dealer? (i hate to) or can i test the mod. or ground if i take the door panel off? thanks.
j.jam
Hi there,
Honestly, you are still under warranty, so I would simply take it back to the dealer and show them exactly what it is doing.
Fact is that there could be a bad connection, or other things that could cause the condition.
And it wont cost you anything as long as nothing has been modified in the door.
Allthebest ,c4c5
GM World Class Certified Technician.
Like us: www.facebook.com/corvettemechanic
http://twitter.com/GMvettemechanic
http://thecorvettemechanic.com
Podcast: Itunes, search 'the corvette mechanic'
my locks are fine, must have been frozen, thanks again
Hi there,
You might want to spray some WD-40 in the locks and latches.
This is a moisture displacement lubricant and would drive moisture out of any parts.
Allthebest, c4c5
GM World Class Certified Technician.
Like us: www.facebook.com/corvettemechanic
http://twitter.com/GMvettemechanic
http://thecorvettemechanic.com
Podcast: Itunes, search 'the corvette mechanic'
Bookmarks