-
Member
LS7Manifold question
HI
I have a 2002 coupe blackwing, 160 degree therm, Z06 Ti exhaust and street tuned.
I was advised that l should switch my manifold to a LS7.
Any thoughts, l do not track it and l really don't want to spend too much until l decide l'm going to keep it. Right now l'm approaching 20,000 miles
and if the economy picks up l would like to move up to a C6 if possible.
By the way what else would l have to change besides the manifold?
Thanks
Alan
-
Technical Writer for Internet & Print Media
The LS7 intake manifold will not fit an LS1 engine.
You can gain about 5-hp if you install the LS6 intake on a LS1 from MY00 or earlier.
-
Member

Originally Posted by
Hib Halverson
The LS7 intake manifold will not fit an LS1 engine.
You can gain about 5-hp if you install the LS6 intake on a LS1 from MY00 or earlier.
Hi
There is a kit that will allow the LS7 to work. But to add 5hp on my 02 is not worth the $ for sure.
Alan
-
Moderator
I was going to say, 2001 and up LS1's have the LS6 manifold, which I believe, is pretty efficient.
-
Technical Writer for Internet & Print Media

Originally Posted by
kingman
Hi
There is a kit that will allow the LS7 to work. But to add 5hp on my 02 is not worth the $ for sure.
Alan
Please advise the source of the kit which allows one to fit an LS7 intake manifold to an LS1.
Similar Threads
-
By Nick90vetteguy in forum C4 Technical and Performance
Replies: 8
Last Post: 01-19-11, 05:13 AM
-
By rsimoes in forum C5 Technical and Performance
Replies: 11
Last Post: 12-12-03, 10:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Owned and Operated by © 2000-2013 Corvette Action Center | |
© CORVETTE is a registered trademark of the General Motors Corporation & Chevrolet Motor Division. Neither Chevrolet Motor Division nor any subsidiaries of GM© shall bear any responsibility for CorvetteActionCenter.com content, comments, or advertising. CorvetteActionCenter.com is independent from GM© and is not affiliated with, sponsored or supported by GM©. Copyright/trademark/sales mark infringements are not intended, or implied. All Rights Reserved
Bookmarks