Plenum

**Vettefan87** · 07-22-04, 07:14 PM

Well I pulled the Plenum off the car to take the ridge off that robs airflow. What is the best way remove this with out hurting the plenum? Thanks

Justin

WNH · 07-23-04, 03:16 AM

Is that what they call "porting" the plenum????

Moonunit 451 · 07-23-04, 07:58 PM

Originally Posted by Vettefan87

Well I pulled the Plenum off the car to take the ridge off that robs airflow. What is the best way remove this with out hurting the plenum? Thanks

Justin

I think most folks use a Dremmel, or similar device.

As far as porting this would probably qualify as a mild port job.

**Vettefan87** · 07-24-04, 03:06 AM

Will I see any gains doing this? Some people say that it "woke" there car up, and some they could not tell a difference?

Justin

**Vettefan87** · 07-26-04, 04:24 PM

Well today was my day off, and I decided to start porting this plenum. What is the best way to clean up all of these shavings? Thanks

Justin

**Hrtbeat1** · 07-27-04, 01:06 AM

Soap and water and compressed air is normally how they clean them up. If you really feel like giving it a good cleaning take it to your local quarter car wash and pressure wash it.

Tanreall · 07-27-04, 03:20 AM

Any pictures of how you ported them? I would really be interested in doing this and I have the right equipment but I'm scared to death that I will screw something up. Any advice now that you have already done it?

**Vettefan87** · 07-27-04, 05:39 PM

Once you take the TB off the plenum you can really see how restrictive it is. I am filing off the ridge that is right up front and some of the sides.

Justin