-
Z51 Package
How would you determine if your Corvette has the Z51 option??
-
Supporting Member
Look on the RPO option list on the sticker in the storage compartment.
If you can't find it there, then turn your steering wheel lock to lock.
If you get 2 to 2 1/4 turns you have the Z51 option, 2 1/2 to 2 3/4 turns and you don't have it.
-
There is nothing in the storage area to indicate anything one way or the other but if your lock-to-lock theory is valid it dose have the Z51 option.
I ask this Q as to determine the correct shocks to purchase.
The bilsteins on this car are showing sighs of leakage.
-
Member
Packrat33, what year is your car?
-
Supporting Member
Can't take credit for the tip, it comes from the C4 shock section of the Mid-America catalog.
-
-
Member
If you have a 94 then the RPO sheet will be under the arm tray of your console bin. If you have Z51 it is marked as such. Base suspension is FE1.
-
Will so much for the lock-to-lock theory. It is listed on the RPO sheet. under side of the console lid as a FE1.
Thanks for all the info.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Owned and Operated by © 2000-2013 Corvette Action Center | |
© CORVETTE is a registered trademark of the General Motors Corporation & Chevrolet Motor Division. Neither Chevrolet Motor Division nor any subsidiaries of GM© shall bear any responsibility for CorvetteActionCenter.com content, comments, or advertising. CorvetteActionCenter.com is independent from GM© and is not affiliated with, sponsored or supported by GM©. Copyright/trademark/sales mark infringements are not intended, or implied. All Rights Reserved
Bookmarks