Bookmark This Page | Recommend This Page | Site Search
Corvette Action Center - The ultimate online hub of Corvette news and information! 2010 Corvette Grand Sport
 

Supporting Vendors / Dealers - Supporting Membership - Advertising Information
Results 1 to 14 of 14
Like Tree1Likes
  • 1 Post By Marv02

Thread: How loud are Borla Stingers Exhaust

  1. #1
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default How loud are Borla Stingers Exhaust

    I have Thrush 2 chamber Muflers now wifes says they are to loud.
    There just as loud as Flowmaster 40"s..
    How Loud are Borla Stinger cat back Mufflers compaired to Flowmaster 40"s.
    And how are the standered 2.25 Borla direct fit mufflers.
    I also had a set of Magnaflow's they 2.25 they were to quite for my taste.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  2. #2
    Member CharlesBrown's Avatar
    Join Date
    Jan 2006
    Location
    St. Louis
    Posts
    203
    Corvette(s)
    1988 35th anniversary

    Default

    Second question you may want to ask... Do they drone, resonate etc.? YES!

  3. #3
    Supporting Member Tuna's Avatar
    Join Date
    Mar 2003
    Location
    Mustang, OK
    Posts
    3,145
    Corvette(s)
    08 Silver Vert (+V Wagon & Volt)

    Default

    Corsa - nice rumble at idle and plenty loud under throttle plus no drone/resonance at cruise.
    Tuna
    NCM Lifer - NCM Fighter Squadron
    2014 Caravan Captain - OK/TX Panhandle
    Central OK CC - Lone Star CC

  4. #4
    Member tmkassin's Avatar
    Join Date
    May 2009
    Location
    Macomb,MI
    Posts
    227
    Corvette(s)
    1992 Blue LT1

    Default

    I have cat back Borla's and they are not loud till you open the throttle.

  5. #5
    Technical Writer for Internet & Print Media
    Join Date
    Jan 2001
    Location
    Southern California
    Posts
    5,268
    Corvette(s)
    71 95 04 12

    Default

    I've got a pal with an 02 Z06 and he's got Borla Stingers on the car. Even with cats, they are loud. He's going to headers and no cats and the noise ought to deafen him out of the car when at high throttle openings...on the other hand, maybe the reason he's got that exhaust is he's already "deaf".
    Last edited by Hib Halverson; 02-18-12 at 10:12 AM.

  6. #6
    Moderator KANE's Avatar
    Join Date
    Mar 2002
    Location
    KY
    Posts
    3,483
    Corvette(s)
    Nope... RPO Y82

    Default

    FWIW- YouTube has a lot of videos of exhaust systems.

    Granted... the sound is only as good as your PC, but it should at least give you an idea.


    Good luck & hope that helps!

  7. #7
    Supporting Member Tuna's Avatar
    Join Date
    Mar 2003
    Location
    Mustang, OK
    Posts
    3,145
    Corvette(s)
    08 Silver Vert (+V Wagon & Volt)

    Default

    Quote Originally Posted by KANE View Post
    FWIW- YouTube has a lot of videos of exhaust systems.

    Granted... the sound is only as good as your PC, but it should at least give you an idea.

    Good luck & hope that helps!
    These sound files don't communicate whether there is a drone/resonance while cruising.
    Tuna
    NCM Lifer - NCM Fighter Squadron
    2014 Caravan Captain - OK/TX Panhandle
    Central OK CC - Lone Star CC

  8. #8
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    Sounds clips are not all that great.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  9. #9
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    I end up Ordering a set of Borla 11134 slip fit mufflers with the 2.250 pipes.

    They say they are louder than stock Mufflers but no drone inside the cab at cruise.

    They were $417.00 No tax free shipping on Amazon.

    Now I need to crawl under the car again and cut off the welds where the pipes slip joins at are now.

    So when the pipes show up during the week it be all ready for to be put on.

    But I doing more than 1 thing as long I am under the car again.

    Installing a higher reving Governer in the trans and fixing the Lock plug that go's into the trans it has a broken wire I think once I get the Lock working again my MPG might go up.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  10. #10
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    Cut off the old exhaust about 3 hours latter the New Borla Exhaust showed up on the UPS truck Ya.
    But as normal with my luck Bad LOL it missing 2 ball joint flanges.
    So I on hold once again.
    I wrote Borla a E-Mail with any luck they will ship me the missing parts I need to finish the exhaust instalation soon.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  11. #11
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    Borla just called me back there arte shipping the ball flanges out this comming monday.
    Thanks Borla.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  12. #12
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    There on fired up the Vett sounds good I take for a drive tommarow.
    But they dont have the nasty sound of the 2 chambered mufflers did at idle from standing behide the car.
    But much better already just sitting inside the car no drone yet.
    KANE likes this.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  13. #13
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default

    Took a drive down to the local donut shop across town the car sounds liveable from the inside of the cab it mostly a 45 MPH drive where the car had a lot of headach causing type Drone not there anymore I have not had it on the HWY yet.

    But at 55 MPH it was a very bad drone before I think if there's going to be any at all it be very little.

    Ya Ya I dont want to hear it 55 MPH you have to go that slow every now and then when it the speed limit when a Cop behind you, Stuck behide someone else thats doing 55 or just could be one of those days LOL.
    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

  14. #14
    Member Marv02's Avatar
    Join Date
    May 2010
    Location
    California City Ca
    Posts
    476
    Corvette(s)
    1986 C-4 Corvette

    Default Up on the Hwy

    Took the car up on to the Hwy at 55MPH same amount of dronevery little as at 45 MPH very nice at 70 legal speed limit you can hear it butnot much 70+ it the same as 70 MPH not saying I was speeding that be wrong ofme to speed.

    Now you can drive the car long distances without going deafdoing so or have your ears ringing after you get out the car for next couplehours any more.

    Just to recap these are Not the Borla Stingers Part # 11134 are the slip on type mufflers.

    383 4 bolt main (10.5 to 1) Balanced, Flat top , pistons LT-4 Hotcam, C C ultra pro magnum steel 1.6 RRA, Trick Flow Heads Super 23 (195 runners) 62cc , SPL runners, Hi Flow intake base, 24# FIC Bosch 3 Injectors, Chipped, Melrose full headers, 3 way Main cat, Borla 11134.
    700r4 Trans built, 2500 Stall Lock up Convertor, 307 rearend.373
    403 H/P @ 5000
    498 TQ @ 2500

Similar Threads

  1. Borla Stingers
    By Jack_msp in forum C5 Z06 Discussion
    Replies: 1
    Last Post: 11-26-07, 03:38 PM
  2. Borla X-Pipe w/ Borla Stingers....
    By C598LS1 in forum C5 General Discussion
    Replies: 3
    Last Post: 09-18-06, 07:37 PM
  3. BORLA XR-1, BORLA STINGERS, or SLP LOUDMOUTH???
    By C598LS1 in forum C5 Technical and Performance
    Replies: 12
    Last Post: 08-29-06, 06:48 AM
  4. Z06 Exhaust for Borla Stingers
    By Remo in forum C5 Parts For Sale / Wanted
    Replies: 11
    Last Post: 04-30-05, 08:02 AM
  5. Just put on my Borla Stingers.
    By E. J. in forum C5 Technical and Performance
    Replies: 1
    Last Post: 07-30-03, 08:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Owned and Operated by The Torque Network, LLC  © 2000-2012 Corvette Action Center, Inc.  Contact Us | Terms of Service | Advertise with us
© CORVETTE is a registered trademark of the General Motors Corporation & Chevrolet Motor Division.  Neither Chevrolet Motor Division nor any subsidiaries of GM© shall bear any responsibility for CorvetteActionCenter.com content, comments, or advertising. CorvetteActionCenter.com is independent from GM© and is not affiliated with, sponsored or supported by GM©.  Copyright/trademark/sales mark infringements are not intended, or implied.  All Rights Reserved