Interior Question

[nj7000]

I was wondering where the best place is to get one of the fiberboards that line each side of the center console; the ones that have carpet over them. One of mine is cracked so the carpet won't dit snug under the console. Any suggestions??

[Dave L.]

Call Corvette America 1-800-458-3475. I think the pair goes for 29 bucks.

[Lucky 3]

Where do you live in Minnesota? Try Corvette specalites in Blaine, 763-784-8577. Bill

[nj7000]

I'm near St Cloud, so it's not all that far from Blaine. I'll give them a call and see what they want for the set, so I can see how close they are to Corvette America, thanks!

[Space Cowboy]

Try Wilcox as well. They've always beat most of the parts houses for me.

http://www.yankeelady.com/willcox/index.htm

Space Cowboy

[wishuwerehere82]

I made some fiber board replacements for my restoration out of Pylon brand 1/32" plywood from a local hobby shop. It doesn't pull out, warp and crack like the fiber board and the screws won't pop through. It's not original, but it works great!

[photovette]

And, the ones you buy never fit right--not even close----it's the strangest thing.

[nj7000]

I made some fiber board replacements for my restoration out of Pylon brand 1/32" plywood from a local hobby shop. It doesn't pull out, warp and crack like the fiber board and the screws won't pop through. It's not original, but it works great!

I noticed the originals have a slight curve to them through the center, the plywood will bend like that also?

[wishuwerehere82]

It bends and flexes a lot better than the 1/4" fiber does. It's thinner, so it fits a lot closer to the carpet on the console. You can wet a spot that you want to bend and get a permanent bend in that spot.