| Industry Partners |
Art
|
Brakes
|
Dealers
|
Driving Schools
|
General
|
Parts & Accessories
|
|
| C4 Technical and Performance For technical and performance related discussion of 1984 - 1996 Corvettes. |
 |
03-26-07, 09:16 AM
|
#1 (permalink)
|
|
New Member
Join Date: Jun 2006
Location: Waxhaw,NC
Posts: 12
My Corvette(s): 1991 Convertible
|
91 Vert Storage Lid
Hello,
I have a 91 Vert that the storage lid will not open. I have checked all the fuses and can't find a problem there. Can the lid be opened manually? If so,how do you do it. I have tried the three buttons,one in the door,one in the console,and one under the storage lid. All worked prior to this. Will not open. Thanks for your help. Also, what will I be looking for and where that has gone bad.
Randy
|
|
|
Reply w/ Quote |
|
03-28-07, 03:30 PM
|
#2 (permalink)
|
|
Registered User
Join Date: Oct 2005
Location: Memphis
Posts: 142
My Corvette(s): 1990 triple-black convertible 6spd,FX3,AQ9,C68
|
The deck lid can be opened manually by locating the black lanyard on each side of the top stowage area.
Standing on one side of the car, just aft of the seatback, reach under the lid and feel around for a plastic-coated, cable lanyard that has a loop in the free end.
Pull the lanyard aft, then go to the other side of the car and repeat. The lid should pop open.
|
|
|
Reply w/ Quote |
|
03-28-07, 04:22 PM
|
#3 (permalink)
|
|
New Member
Join Date: Jun 2006
Location: Waxhaw,NC
Posts: 12
My Corvette(s): 1991 Convertible
|
Deck Lid
Airbus,
Thanks for the reply. I will try your suggestion when I get home. Any idea what is causing the lid not to release.
Thanks,
Randy
|
|
|
Reply w/ Quote |
|
03-28-07, 05:04 PM
|
#4 (permalink)
|
|
Registered User
Join Date: Oct 2005
Location: Memphis
Posts: 142
My Corvette(s): 1990 triple-black convertible 6spd,FX3,AQ9,C68
|
Do you have the Factory Service Manual?
If you do, we can hook up by phone using the two copies and I might be able to walk you through a little troubleshooting.
(will be out till about 8 pm central this eve.)
Last edited by Evolution1980; 04-03-07 at 10:55 AM.
|
|
|
Reply w/ Quote |
|
03-29-07, 12:54 PM
|
#5 (permalink)
|
|
New Member
Join Date: Jun 2006
Location: Waxhaw,NC
Posts: 12
My Corvette(s): 1991 Convertible
|
Airbus,
I do have the manuals. I didn't see the response until today. I can call you in the evening,whenever it is convenient.
Thanks,
randy
|
|
|
Reply w/ Quote |
|
03-29-07, 04:11 PM
|
#6 (permalink)
|
|
Registered User
Join Date: Oct 2005
Location: Memphis
Posts: 142
My Corvette(s): 1990 triple-black convertible 6spd,FX3,AQ9,C68
|
Quote:
Originally Posted by rfh11
Airbus,
I do have the manuals. I didn't see the response until today. I can call you in the evening,whenever it is convenient.
Thanks,
randy
|
Call me tonight, we'll look at the books and, hopefully, come up with a troubleshooting plan.
|
|
|
Reply w/ Quote |
|
04-20-08, 12:51 AM
|
#7 (permalink)
|
|
Member
Join Date: Feb 2008
Location: Camarillo, CA
Posts: 29
My Corvette(s): 1990 convertible, red/tan/tan, 6 speed
|
Airbus/memphis? FedEx?
Anyhow, I've been having a similar problem with the deck lid on my 90. The deck lid kept popping up on it's own and the actuators would click open randomly. I pulled the fuse and pulled back the carpet and insulation back there. I found the connectors for the deck lid actuators were wet and the depressions where the wires go through the body to the tail light were completely filled with water. I use a long 1/8" drill to drill a drain hole at the bottom of each depression to let the water out. Most of the wiring and connectors are on the passenger side.
If you look at how they did the drainage for the deck lid it doesn't work well if you car is pointed up hill, especially when you wash it pointed up hill!
Scott
Last edited by sstearns2; 04-20-08 at 12:53 AM.
|
|
|
Reply w/ Quote |
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|