Anyone know where I can buy matching bolts that hold the non-power master cylinder to the firewall? Doesn't look like a common item carried by any of the main suppliers for midyears.
Bill, those were 3/8"-16 round-head studs with a knurled section where they were pressed into the flanges on the brake pedal support; if you just use 3/8"-16 bolts from the inside instead, nobody will ever know the difference.
Bill, those were 3/8"-16 round-head studs with a knurled section where they were pressed into the flanges on the brake pedal support; if you just use 3/8"-16 bolts from the inside instead, nobody will ever know the difference.
Art
65 master cylinder
Linear Mode
