Bookmark This Page | Recommend This Page
 

Industry Partners
Art
Brakes
Dealers
Baystate Motorsports
Corvette Mike New England

E-mail: Chris Warren
E-mail: Kevin Will


E-mail: Ron Ignelzi
Driving Schools
General
Carseek
Parts & Accessories
Corvette Guys
Custom Corvette Accessories
Ecklers
Zip Products

Go Back   Corvette Action Center > 1968 - 1982 Corvettes > C3 Technical and Performance


C3 Technical and Performance For technical and performance related discussion of 1968 - 1982 Corvettes.

Reply
 
LinkBack Thread Tools Display Modes
Old 09-23-06, 08:44 PM   #1 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default jumped starter

hello everyone i have a ??? i just picked up a 1975 vette with 4 speed matching #350, but it will not start with key . it will if jumped at starter and key on .have ck neutral safty under dash,key switch . it has stock alarm is there a box where the wires go to work alarm. could that be it .. thanks mike
  Reply w/ Quote |
Old 09-23-06, 08:54 PM   #2 (permalink)
Member
zachh is offline
 
zachh's Avatar
 
Join Date: Aug 2005
Location: virginia beach, va
Posts: 224
My Corvette(s):
1979 black 'n' silver L82 1978 Trans Am Y88
Default

Bad starter? That could be a possibility. Also, there may be a weak ground somewhere, that could cause it to do that.
zachh
  Reply w/ Quote |
Old 09-23-06, 08:59 PM   #3 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

ck w 12v tester everything has power . starter sounds fine when it turns
  Reply w/ Quote |
Old 09-24-06, 11:47 AM   #4 (permalink)
Member
Vettehead Mikey is offline
 
Vettehead Mikey's Avatar
 
Join Date: Aug 2003
Location: Montreal Canada
Posts: 1,488
My Corvette(s):
1973 Coupe
Default

The stock alarm has no interconnections with the starter circuitry, so you can eliminate that as the cause.
  Reply w/ Quote |
Old 09-24-06, 01:19 PM   #5 (permalink)
Member
Artsvette73 is offline
 
Artsvette73's Avatar
 
Join Date: Jan 2004
Location: New Jersey
Posts: 167
My Corvette(s):
1973 Silver coupe, 1977 L48
Default

Ignition switch at the base of the column bad, or in need of adjustment? You know the run part of the switch is good cause you jumped at the starter. And the car ran, but the start function is not
  Reply w/ Quote |
Old 09-24-06, 02:16 PM   #6 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Vettehead Mikey View Post
The stock alarm has no interconnections with the starter circuitry, so you can eliminate that as the cause.
thanks do you have any other thoughts on the matter
  Reply w/ Quote |
Old 09-24-06, 02:22 PM   #7 (permalink)
Member
Artsvette73 is offline
 
Artsvette73's Avatar
 
Join Date: Jan 2004
Location: New Jersey
Posts: 167
My Corvette(s):
1973 Silver coupe, 1977 L48
Default

Just check the purple wire runs from the starter to the neutral safety and then ignition switch. Check that
  Reply w/ Quote |
Old 09-24-06, 02:23 PM   #8 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Artsvette73 View Post
Ignition switch at the base of the column bad, or in need of adjustment? You know the run part of the switch is good cause you jumped at the starter. And the car ran, but the start function is not
the wires at base have power .. how can you ajust switch thanks 4 help
  Reply w/ Quote |
Old 09-24-06, 02:30 PM   #9 (permalink)
Member
Artsvette73 is offline
 
Artsvette73's Avatar
 
Join Date: Jan 2004
Location: New Jersey
Posts: 167
My Corvette(s):
1973 Silver coupe, 1977 L48
Default

Disconnet the clutch rod under under the brake booster. Check for power when you depress the clutch. Should be two screws holding the safety switch. Loosen and rotate until you have power in and out of the switch. Sometimes you can just bend the rod to get the adjustment.
  Reply w/ Quote |
Old 09-24-06, 02:39 PM   #10 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Artsvette73 View Post
Just check the purple wire runs from the starter to the neutral safety and then ignition switch. Check that
we by passed neutral switch its on top of padel right . there is a orange plastc box on pass side top firewall do you no what its for i am ordering a assembly book and wire diagram maybe that will also help..
  Reply w/ Quote |
Old 09-24-06, 02:52 PM   #11 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Artsvette73 View Post
Disconnet the clutch rod under under the brake booster. Check for power when you depress the clutch. Should be two screws holding the safety switch. Loosen and rotate until you have power in and out of the switch. Sometimes you can just bend the rod to get the adjustment.
ok i will try that next thanks
  Reply w/ Quote |
Old 09-24-06, 03:33 PM   #12 (permalink)
Member
Vettehead Mikey is offline
 
Vettehead Mikey's Avatar
 
Join Date: Aug 2003
Location: Montreal Canada
Posts: 1,488
My Corvette(s):
1973 Coupe
Default

Quote:
Originally Posted by chevy6675 View Post
we by passed neutral switch its on top of padel right . there is a orange plastc box on pass side top firewall do you no what its for i am ordering a assembly book and wire diagram maybe that will also help..
Are you sure you bought a '75 and not a '74? That box sounds like the '74 only seatbelt interlock relay. The car won't start unless the seatbelts are buckled.
  Reply w/ Quote |
Old 09-24-06, 08:15 PM   #13 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Vettehead Mikey View Post
Are you sure you bought a '75 and not a '74? That box sounds like the '74 only seatbelt interlock relay. The car won't start unless the seatbelts are buckled.
at this point who knows .the title says 1975 the the 6th number on vin on car is 5 the information from this site says that is date number and half of numbers on block match half numbers on vin tag and it has a one pcs back bumber cover 74 has 2 pcs ..when i got car thought it had to be n/s switch or starter or ign switch am lost now .one of the guys here said try puting seatbelt in but it did not work the red lights (dash ) when you try to start it the tester says everything is getting power but when you turn key al the way its like it has no power.. the n/s has one purple wire and one purple with white line though it. whats next ??????
  Reply w/ Quote |
Old 09-24-06, 09:10 PM   #14 (permalink)
Member
chevy6673 is offline
 
chevy6673's Avatar
 
Join Date: Sep 2006
Location: illinois,crete
Posts: 259
My Corvette(s):
1973 Corvette ,1966 ss impala
Default

Quote:
Originally Posted by Vettehead Mikey View Post
Are you sure you bought a '75 and not a '74? That box sounds like the '74 only seatbelt interlock relay. The car won't start unless the seatbelts are buckled.
part 2 i seen a picture of what you where talking about that relay.. thats whats there but the the relay box is missing all thats left is the plastic base and someone has played with wires there.the tags look fine and untouched .this keeps getting better so if thats only 74 the fire wall is part of body how can this be ...i thought i was lost before
  Reply w/ Quote |
Old 09-24-06, 10:26 PM   #15 (permalink)
Member
Artsvette73 is offline
 
Artsvette73's Avatar
 
Join Date: Jan 2004
Location: New Jersey
Posts: 167
My Corvette(s):
1973 Silver coupe, 1977 L48
Default

At the orange box Jump the pink and purple see if it starts. This was 74 only
  Reply w/ Quote |
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Electrical Gurus Chime In - Mini Starter and HEI Whiplash C3 Technical and Performance 3 08-24-06 11:52 PM
Starter Noises on 92 Corvette Doutdoor C4 Technical and Performance 10 03-23-05 02:03 PM
Starter Help rw24 C3 General Discussion 10 07-02-04 07:11 PM
HELP! Starter shorting on turbo!!! malc350 Callaway Corvette Forum 4 10-19-03 09:19 AM
Help ! Starter problems Radar C4 Technical and Performance 4 07-09-02 06:50 PM



All times are GMT -5. The time now is 05:20 PM.


Powered by vBulletin® Version 3.8.0 Beta 4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0