Bookmark This Page | Recommend This Page
 

Industry Partners
Art
Brakes
Dealers
Baystate Motorsports
Corvette Mike New England

E-mail: Chris Warren
E-mail: Kevin Will


E-mail: Ron Ignelzi
Driving Schools
General
Carseek
Parts & Accessories
Corvette Guys
Custom Corvette Accessories
Ecklers
Zip Products

Go Back   Corvette Action Center > 1968 - 1982 Corvettes > C3 General Discussion > L81 Vette Registry Forum


L81 Vette Registry Forum For L81 Vette Registry members. All 1981 owners are welcome!

Reply
 
LinkBack Thread Tools Display Modes
Old 09-13-06, 12:03 AM   #1 (permalink)
Supporting Member
GerryLP is offline
 
GerryLP's Avatar
 
Join Date: Apr 2001
Location: Rio Rancho, NM
Posts: 1,795
My Corvette(s):
1981 HD Suspension; ZN1 Option
Default Ok, is my turn to ask again.

Moving along on the L81 project. But here is a minor hump on the road.

I should probably not ask when it's late and I am tired, but I can't remember where this goes.

Attachment 11177

Any suggestions?

GerryLP

Last edited by GerryLP; 10-29-06 at 11:40 PM.
  Reply w/ Quote |
Old 09-13-06, 02:01 PM   #2 (permalink)
Member
gedmeyer is offline
 
gedmeyer's Avatar
 
Join Date: May 2003
Location: upstate New York
Posts: 315
My Corvette(s):
1981 Charcoal 4-spd, rebuilt to 383, sidepipes
Default

Not certain, but that might connect to the lead from the oxygen sensor.
__________________
Charcoal Metallic '81 (Roxy), 383 Stroker, Hooker side pipes!
  Reply w/ Quote |
Old 09-13-06, 03:17 PM   #3 (permalink)
Member
Peer81 is offline
 
Join Date: May 2003
Location: Netherlands
Posts: 1,114
My Corvette(s):
'81 Black
Default

It could connect to the EGR solenoids on the other side.

Groeten Peter.
  Reply w/ Quote |
Old 09-13-06, 03:42 PM   #4 (permalink)
Supporting Member
bill81vette is offline
 
bill81vette's Avatar
 
Join Date: Jan 2004
Location: Troy,NY
Posts: 3,265
My Corvette(s):
1981 dark blue metallic
Default

Gerry,went out and looked at mine,the only wiring I could find in that area is a few relays on the firewall right behind there!!
good luck,
__________________
Bill and Gail...save the wave
NCRS member 42415
1981 St.Louis car #2735
all matching numbers

born Sept 18,1980
Cruisefest V Registration #5



  Reply w/ Quote |
Old 09-13-06, 05:34 PM   #5 (permalink)
Member
Peer81 is offline
 
Join Date: May 2003
Location: Netherlands
Posts: 1,114
My Corvette(s):
'81 Black
Default

The relays on the firewall behind the photolocation have 3 (or more) pole connectors.
@Gerry, can you tell us where the wire is comming from. I have a dozen or so photo's when i tool the engine compartment apart so i could look for the right (area) photo.

Groeten Peter.
  Reply w/ Quote |
Old 09-13-06, 07:35 PM   #6 (permalink)
Supporting Member
GerryLP is offline
 
GerryLP's Avatar
 
Join Date: Apr 2001
Location: Rio Rancho, NM
Posts: 1,795
My Corvette(s):
1981 HD Suspension; ZN1 Option
Default

Quote:
Originally Posted by GEDMEYER
Not certain, but that might connect to the lead from the oxygen sensor
I totally forgot about the oxygen sensor (since I have not used one in years).

Quote:
Originally Posted by peer81
Gerry, can you tell us where the wire is coming from
Just went out to the garage. It is coming from the same wire bundle point where the distributor 4 pin connector is and that other 5 pin connector.

I have to try to find my old oxygen sensor to see if it'll fit. That does make sense...

How that h3!! I forgot about the sensor??

It's a good thing that you guys are always willing to help. In my mind, I have that image that Buggs Bunny would turn into when "he" did something dumb.

I'll report back when I have correlated the suggestions.

GerryLP
  Reply w/ Quote |
Old 09-13-06, 09:57 PM   #7 (permalink)
Supporting Member
GerryLP is offline
 
GerryLP's Avatar
 
Join Date: Apr 2001
Location: Rio Rancho, NM
Posts: 1,795
My Corvette(s):
1981 HD Suspension; ZN1 Option
Default

Gedmeyer, Peer, and Bill.

I very much appreciate your quick and immediate help on this issue.

I found my old oxygen sensor, and the pig-tail connector fits into the connector that I showed in the attached picture.

Dummy me forgot about the oxygen sensor.

Thanks again gang. You guy's rock!

GerryLP
  Reply w/ Quote |
Old 09-14-06, 11:59 AM   #8 (permalink)
Member
Peer81 is offline
 
Join Date: May 2003
Location: Netherlands
Posts: 1,114
My Corvette(s):
'81 Black
Default

We're here to help each other Gerry!
The 81 is (IMHO) a very nice c3 so keeping this year alive will bring everybody much fun

Groeten Peter.
  Reply w/ Quote |
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turn signal broke off! LanceB C3 Technical and Performance 24 07-27-04 10:05 AM
X-X Paint code on 65 ? What is it? Davo C1 & C2 General and Technical Discussion 10 05-09-04 08:34 PM
Weird Turn Signal Problem... ???!!! craig0ry C4 Technical and Performance 8 04-28-04 09:27 AM
Sometimes turn signals don't work SilverMN6 C5 Technical and Performance 3 04-03-02 07:20 PM



All times are GMT -5. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.0 Beta 4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0