Bookmark This Page | Recommend This Page
 

Industry Partners
Art
Brakes
Dealers
Baystate Motorsports
Corvette Mike New England

E-mail: Chris Warren
E-mail: Kevin Will


E-mail: Ron Ignelzi
Driving Schools
General
Carseek
Parts & Accessories
Corvette Guys
Custom Corvette Accessories
Ecklers
Zip Products

Go Back   Corvette Action Center > 2005 - 2009 Corvettes > C6 Technical and Performance


C6 Technical and Performance For technical and performance related discussion of 2005+ Corvettes.

Reply
 
LinkBack Thread Tools Display Modes
Old 08-27-06, 11:24 AM   #1 (permalink)
Member
kingman is offline
 
kingman's Avatar
 
Join Date: Jan 2003
Location: New Jersey
Posts: 2,003
My Corvette(s):
2002 Torch Red Coupe
Default Brakes making noise ??

Hi

This is regarding a C6 vert with 15,000 daily miles

My vette brakes are making a high pitched sound when I apply them. I can't hear it, but my kids hear it.

My high frequency hearing is shot. I guess this means I need to get new pads before I kill the rotors. Should the pads wear out in 15,000 miles?

Thanks

Alan
__________________
May Our Trails Meet!
  Reply w/ Quote |
Old 08-27-06, 12:56 PM   #2 (permalink)
Supporting Member
Mr.Cool is offline
 
Mr.Cool's Avatar
 
Join Date: May 2002
Location: NW Florida
Posts: 213
My Corvette(s):
2005 Magnetic Red Coupe / 82 Silver Green
Default

Z51?

My Z51 pads have 20,000 miles including two road track weekends at Roebling Road and my pads still have about 25% left. They do squeal from time to time but a few hard stops solves that problem for a while.

When we were up in NJ last fall I did use the brakes alot but i can't imagine wearing them out that quick on just street driving.
__________________
Donate Life
  Reply w/ Quote |
Old 08-27-06, 12:59 PM   #3 (permalink)
Member
kingman is offline
 
kingman's Avatar
 
Join Date: Jan 2003
Location: New Jersey
Posts: 2,003
My Corvette(s):
2002 Torch Red Coupe
Default That's what l thought!

Thanks, but l wasn't sure.

Alan
__________________
May Our Trails Meet!
  Reply w/ Quote |
Old 08-31-06, 03:44 PM   #4 (permalink)
New Member
fwer is offline
 
Join Date: Apr 2006
Location: South Carolina
Posts: 7
My Corvette(s):
1986 White convertible, 2006 Black/Black Coupe
Default

My brakes were squealing from the first day I got the car. My dealer looked at it and said there was nothing they could do about it. The factory phoned one day and asked how I liked the new vette so I told them about the noise. They called me back and said if I could bring it to the factory, they would change the brakes for me.

I asked my dealer about this and he stated to get a name and he would discuss it with them.

The car just has 2050 miles on it and is still squealling. It seems worse when it gets hot outside.

We'll see, its embarrasing some times - should be for GM also but it doesn't seem to matter.
  Reply w/ Quote |
Old 08-31-06, 03:52 PM   #5 (permalink)
Technical Advisor
c4c5specialist is offline
 
c4c5specialist's Avatar
 
Join Date: May 2001
Location: New Haven, Ct. USA
Posts: 3,235
My Corvette(s):
Nope, but someday.
Default

HI there,
This is a racing braking system, so a bit of noise is NORMAL>
But, for those who dont realize what they have, a revised pad is ON THE WAY!!!
There will be information forthcoming.
Allthebest, c4c5
__________________
GM World Class Certified Technician, it is not a goal, but a steadfast commitment to excellence in a field more demanding than most. Chevrolet Professional service guild NCM#7993. My greatest asset, my daughter. http://corvettemechanic.com

Last edited by c4c5specialist; 08-31-06 at 03:53 PM. Reason: Had to bang my head
  Reply w/ Quote |
Old 10-23-06, 07:50 PM   #6 (permalink)
Member
RUDYBKK is offline
 
Join Date: Dec 2002
Location: TAMPABAY
Posts: 20
My Corvette(s):
2006 Z-51 Le Mans Blue
Default

the answer on squeak brake pads are to replace them with
Hawk Z-51 performance ceramic pads... no more squeak and dust
cost is abt 150 bucks dealers are not having luck with GM on this
issue check around 2005 was bad 2006 a bit better the problem
is heat related.... get the ceramics you will not regret it oh yeah
not recommended for track racing you have to get the Hawk HPS
COMPOSIT'S if your into that //rudybkk//
  Reply w/ Quote |
Old 10-24-06, 06:27 AM   #7 (permalink)
Technical Advisor
c4c5specialist is offline
 
c4c5specialist's Avatar
 
Join Date: May 2001
Location: New Haven, Ct. USA
Posts: 3,235
My Corvette(s):
Nope, but someday.
Default

Quote:
Originally Posted by RUDYBKK View Post
dealers are not having luck with GM on this
issue check around 2005 was bad 2006 a bit better the problem
is heat related.... //rudybkk//
Heat related?? How?? when the noise goes away when hot??
Design, it is in the design.
A high compression resin works wonders and DOESNT need the ceramic composition that wears brake rotors prematurely.
This dealer isnt having problems.
Allthebest, c4c5
  Reply w/ Quote |
Old 10-24-06, 07:05 AM   #8 (permalink)
Member
TAG_SK is offline
 
Join Date: Nov 2004
Location: N. CAL
Posts: 18
My Corvette(s):
2005 silver coupe w/ Steel grey interior
Default

My 05 C6 non Z-51 coupe has 20,000 miles on it and the brakes squeal when they get hot. I drive to work and the first 6 stops are quiet then it sounds worse then nails across a chalk board. The noise goes away for about a week if I go on the back roads and do a few 60mph to 10mph hard stops. I thought at first that my brakes where worn, but I have 80% left on the front and 90% left on the rear. The noise is embarrasing, need to get rid of the squeal.
  Reply w/ Quote |
Old 10-24-06, 08:44 AM   #9 (permalink)
Technical Advisor
c4c5specialist is offline
 
c4c5specialist's Avatar
 
Join Date: May 2001
Location: New Haven, Ct. USA
Posts: 3,235
My Corvette(s):
Nope, but someday.
Default

[quote=TAG_SK;760523]My 05 C6 non Z-51 quote]
This is the key, 2 different pad compositions between Z51 and NON Z51
Allthebest,
  Reply w/ Quote |
Old 10-25-06, 02:20 AM   #10 (permalink)
Member
TAG_SK is offline
 
Join Date: Nov 2004
Location: N. CAL
Posts: 18
My Corvette(s):
2005 silver coupe w/ Steel grey interior
Default

I know there is a difference between Z-51 and no Z-51, just wondering why I have brake noise when I never had it before.
  Reply w/ Quote |
Old 10-28-06, 10:12 AM   #11 (permalink)
Member
NORTY is offline
 
Join Date: Sep 2006
Location: Carlsbad,Ca.
Posts: 418
My Corvette(s):
2006 C6Z DSOM
Default

Quote:
Originally Posted by TAG_SK View Post
I know there is a difference between Z-51 and no Z-51, just wondering why I have brake noise when I never had it before.
The noise you have could be the "early warning" wear indicators touching the rotor edge. Are they worn to 2mm? This is the recommended replacement measurement. (The Z06 has no "early warning" scratching sound on their pads.) New pads are 10mm of material,BTW. If you're down to 25%,then it's time to change them out.
  Reply w/ Quote |
Old 11-19-06, 07:05 PM   #12 (permalink)
Member
Tyson is offline
 
Tyson's Avatar
 
Join Date: Aug 2005
Location: Sacramento
Posts: 17
My Corvette(s):
2005 C6
Default

I have an '06 w/ Z51 package, and have suffered from squeeling from day 1. Pads are still good at 14,000miles. When the time comes, what should I replace them with to prevent this? Is there a specifc type, part, composition, etc. Thanks.
  Reply w/ Quote |
Old 01-12-07, 10:40 PM   #13 (permalink)
Member
nfran2 is offline
 
nfran2's Avatar
 
Join Date: Aug 2004
Location: Windemere, FL
Posts: 21
My Corvette(s):
2007 Atomic Orange Convert 6 speed
Default

Guys, there is a bulletin out from GM regarding brake noise for 2005 - 2006. Check out the site right here on Corvette Action Center:
http://www.corvetteactioncenter.com/....php?qstId=568

2006: Brake Pads Brake Pads
For 2006, a new brake pad is introduced on the Z51 Corvettes for reduced operating noise. It is quieter than the pad used in 2005.

TIP: Use European specification brake pads for autocross competition. However, operating noise will be noticed with these pads.
  Reply w/ Quote |
Old 01-13-07, 08:39 AM   #14 (permalink)
Member
RUDYBKK is offline
 
Join Date: Dec 2002
Location: TAMPABAY
Posts: 20
My Corvette(s):
2006 Z-51 Le Mans Blue
Default BRAKE PADS

Quote:
Originally Posted by Tyson View Post
I have an '06 w/ Z51 package, and have suffered from squeeling from day 1. Pads are still good at 14,000miles. When the time comes, what should I replace them with to prevent this? Is there a specifc type, part, composition, etc. Thanks.
I took OEM off (in trunk now) replaced
with HAWK CERAMIC No noise No
brake pad dust. These good for street
and GENERAL highway use do not
TRACK car heavy usage may cause
glazing.. for every day normal driving they are great great... //r//
  Reply w/ Quote |
Old 01-13-07, 01:24 PM   #15 (permalink)
Member
nfran2 is offline
 
nfran2's Avatar
 
Join Date: Aug 2004
Location: Windemere, FL
Posts: 21
My Corvette(s):
2007 Atomic Orange Convert 6 speed
Default

My new 07 Z51 doesn't have a peep from the brakes. Maybe GM finally got the material right.
  Reply w/ Quote |
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fans making noise? GuyzVette C4 Technical and Performance 2 03-09-06 11:57 PM
My 1996 CE pass. a/c vent is loose and making noise. Vette96CE C4 General Discussion 1 01-21-05 01:17 AM
"Clicking" noise out of my front wheels...brakes?? limomanb C4 Technical and Performance 0 10-09-04 03:55 PM
Air Pump making noise... vetteboy86 C4 Technical and Performance 7 09-19-04 07:44 PM
What's wrong with our brakes? norvalwilhelm C3 Technical and Performance 9 08-19-04 11:53 PM



All times are GMT -5. The time now is 09:40 PM.


Powered by vBulletin® Version 3.8.0 Beta 4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0