Bookmark This Page | Recommend This Page
 

Go Back   Corvette Action Center > 1984 - 1996 Corvettes > C4 Technical and Performance


C4 Technical and Performance For technical and performance related discussion of 1984 - 1996 Corvettes.

Industry Partners
Art
Brakes
Vette Brakes and Products
Dealers
Baystate Motorsports
Corvette Mike New England

E-mail: Chris Warren
E-mail: Kevin Will


E-mail: Ron Ignelzi
Driving Schools
Spring Mountain Motorsports
General
Carseek
Parts & Accessories
Corvette Guys
Custom Corvette Accessories
Ecklers
Southern Car Parts
Vette Brakes and Products
Zip Products

Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-06, 09:06 PM   #1 (permalink)
Supporting Member
UB2 SLOW is offline
 
UB2 SLOW's Avatar
 
Join Date: Jul 2002
Location: Near Insanityville.
Posts: 1,681
My Corvette(s):
96 with a mod or two.
Default Vacuum hose ends where?

The vacuum hose that exits the cruise control module and goes under the ECM towards the rear of the car ends where? The manual does not say and I cant find it? I need to replace this hose. Any help would be great.
__________________
  Reply w/ Quote |
Old 06-27-06, 09:34 PM   #2 (permalink)
Supporting Member
KOPBET is offline
 
KOPBET's Avatar
 
Join Date: Jan 2003
Location: Tulsey Town
Posts: 3,554
My Corvette(s):
'96 Arctic White Çøüpé † '73 Silver LS4 4 speed
Default

Book 2 pg 9B-4 figure 3.

  Reply w/ Quote |
Old 06-27-06, 11:46 PM   #3 (permalink)
Jeb
Member
Jeb is offline
 
Jeb's Avatar
 
Join Date: Jan 2005
Location: Covington, Louisiana
Posts: 354
My Corvette(s):
1987 Convertable
Default

On an '87 it goes to the switch above the brake pedal.

Don't know if it's the same on a '96 but it probably is.
  Reply w/ Quote |
Old 06-28-06, 10:20 AM   #4 (permalink)
Member
John Robinson is offline
 
John Robinson's Avatar
 
Join Date: May 2005
Location: Muncie, Indiana
Posts: 721
My Corvette(s):
1993 Polo Green Coupe
Default Cruise Vacuum

The vacuum hose goes behind the engine to this vacuum valve. You may find that the valve has broken off the connectors. The good news is if that is the case the replacement part is under $10.

  Reply w/ Quote |
Old 06-29-06, 06:32 PM   #5 (permalink)
Supporting Member
KOPBET is offline
 
KOPBET's Avatar
 
Join Date: Jan 2003
Location: Tulsey Town
Posts: 3,554
My Corvette(s):
'96 Arctic White Çøüpé † '73 Silver LS4 4 speed
Default

Where'd ya go Bryan?
  Reply w/ Quote |
Old 06-29-06, 08:09 PM   #6 (permalink)
Supporting Member
UB2 SLOW is offline
 
UB2 SLOW's Avatar
 
Join Date: Jul 2002
Location: Near Insanityville.
Posts: 1,681
My Corvette(s):
96 with a mod or two.
Default

Still here. I am still putting my car back together. The other hose ran into the firewall and then under the dash. I finally got it replaced today. I almost have the car back together and then its time for a test drive.
__________________
  Reply w/ Quote |
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slight hesitation when hitting the throttle Doktor-t C4 Technical and Performance 12 03-23-06 12:24 PM
Vacuum hose size? celeryman22 C3 Technical and Performance 2 05-09-05 09:06 AM
Ported Vs. Manifold Source: Vacuum Advance photovette C3 Technical and Performance 18 01-07-05 06:55 PM
1990-1995 ZR-1 Secondary Port Vacuum Diagnosis Rob ZR-1 General and Technical Discussion 16 10-28-04 04:27 PM
head lights pizza3260 C3 Technical and Performance 10 05-20-02 09:22 PM



All times are GMT -5. The time now is 11:03 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0