Exhaust System

[Potter]

I have recently installed a 385 HP crate engine along with a rebuilt Turbo 400 Trans from ATI complete with 2500 stall. I am also putting in a set of 3:73 gears and having done all of this my biggest unmade decision thus far is what type of exhaust. I am pretty much sold on putting a 2 1/2 " stainless system on. My questions are (1) Who makes a good ready to bolt on and weld on system for a car equipped with headers?, and (2) Does a flowmaster 40 fit nicely in the muffler wells? One of my dislikes is the way the mufflers hang down on my 73.

[huk_finn]

take a look at : http://www.allencorvetteexhaustsystems.com/
They'll make the system to fit your headers, and ship em to you

[Shaggyvette]

The Flowmasters should fit nicely up into the wells on your Vette. They are totaly out of site on my 82.

Shaggy

[Potter]

Great thanks for the link. Do either of you have 2.5 or 3.0 " pipes ? Also would it be possible to get someone to send me a digital picture of what the flowmasters look like installed. (hgrairserv@aol.com)And last but not least do you have the part number for the flowmasters you installed?

[72ltone]

Here are my Flowmaster 50s on my 72 with 2 1/2 system. The 2 1/2 system will feed up to about 500HP

[savette68/63]

I Live in Australia and had Mike Allen from Allens Exhausts make a stainless Steel Exhaust for my 63, he also gave a 15% discount because it was a complete system order.

Great to deal with very helpfull.

Regards

[Potter]

Thanks for the picture and advice. I have a call into Mike Allen and we are playing phone tag. Great view by the way. Nothing sweeter than the back end of a Vette !! I will follow up with how the system goes on and sounds as the "Money Pit" is nearing completion !!