WTB CENTER A/C VENT BEZEL FOR 68

[painless4u2]

Looking for an unbroken upper center a/c vent bezel that also holds the wiper switch. This bezel has a single register for the a/c. Thanks, Glen

[68Roadster]

Been looking for one for 4 years myself.
Finally bought one from a 69 and haven't gotten around to modifying it to fit the 68.

If you run across a couple let me know and good luck!

Where are you in Texas?

[painless4u2]

Ohhh. I was afraid of that. Dang 68's!!! Central Texas (Temple) is where this ol' bucket 'o bolts resides.

[68Roadster]

I hear ya brother!
The 'ol pot metal bezel just can't handle all that stress after 38 years.
I have been contemplating making one out of fiberglass as well, just been too busy doing other stuff.
If I get around to it you'll be the first one I call!

[painless4u2]

That would be most appreciated. I also heard you can take a non-a/c 69-72 bezel and have the hole (carefully) cut out by a machine shop. It's supposed to even have the same part #. So I think I'll keep checking eBay, etc and try that. Good luck on the fiberglass!