tyber,
this is from the '04 manual...
1) raise and support the vehicle
2) remove the frt brake caliper cooling duct by:
a) remove the fascia close out panel underneath the duct
b) remove the wheelhouse to frt fascia bolts
c) remove the frt fascia to energy absorber bolts
d) remove the frt fascia to skid bar bolts
3) remove the wiring harness retainer clips
4) remove the clips at the top of the fascia grille
5) remove the fascia grille screws at the bottom
6) remove the grille thru the frt of the fascia opening
Good luck!
|