Gears

fredk · 03-09-05, 04:14 PM

Can someone tell me with 3.54 gears at 60 mph what their motor is turning??? This should give a good bang for the buck for the 1/4 mile over my 2.97.

Ken · 03-09-05, 04:38 PM

There's more to it than just the gear ratio of the rear end. You'll have to take into consideration the tire size (overall diameter) and the final drive gear ratio in the transmission (overdrive vs. one-to-one).

fredk · 03-09-05, 08:13 PM

Thanks Ken

Let's not make a simple question difficult. The car is an automatic 1993 LT1 with stock wheel and tire size. Has anyone tried 3.54 gears and if so what rpm does it turn at 60 mph.

G Winter · 03-09-05, 10:57 PM

somewhere on this site is a formula and chart to figure gears , rpm or speed. go to the tech center and look in tools

Vis Croceus · 03-09-05, 11:28 PM

Just take whatever your car turns at 60 and multiply by (3.54/2.59) and that's what your car would turn at 60 with 3.54s.

With the A4 3rd gear and 2.59 is roughly the same as 4th and 3.54.

Er, you have 2.97? then multiply by 3.54/2.97 instead and ignore the last part. What kind of car do you have that has 2.97?