If you are patient you can remove them using a hair dryer. Heat the area either from the front or back. Once the 3m tape has warmed, you should be able to remove the flares. You can also do this...once the area is warm, take a piece of fishing line or nylon thread and slide it between the flares and the fender. Use a "sawing' action to move the line between the flare and the fender. Should come right off.
On some finishes, I've used a plastic putty knife to work the piece loose. But I'm not certain how that would work with the fiberglass fenders.
No sense paying to have it done...a body shop will do essentially the same thing.
Once the piece is removed, 3m makes an adhesive remover or you can use a product like goo-gone. Again, not certain how either of those would work on fiberglass so you may want to check the label or wait for other replies.
Happy New Year
Norm
|
Art
remove fender flares
Linear Mode
