horn still won't blow on 85 vette

esterling · 09-03-04, 02:58 PM

Thanks guys for telling me the location of the horn relay and fuse. I put in a new horn relay today and checked the 10amp fuse. Fuse was fine. I could not see any other fuses behind the DIC to check. However, the horn still doesn't work. When I push on the horn button, I can hear a clicking sound behind DIC.

Any ideas ?

JonM · 09-03-04, 03:20 PM

Did you check your other link for suggestions?

esterling · 09-03-04, 11:32 PM

Thanks for the help. The horn is working now. Can you believe it, I apparently had a loose connection at the horn. I had taken the connections off several time to check to see if they were loose and they didn't appear to be. Oh well, everything is fine now. Thanks again for all your help.

redc4corvette · 09-06-04, 05:05 AM

Shoot a shot of WD40 into each horn both my corvetts horns rust out on a reg basis a little wd and good for another year except this year the*94 I had to remove the horns and hook it up to a battery lube the horns with wd and adjust the star screw until they worked.