Deck Lid Striker Plate rivets

[dgmpam]

Does anyone know what the proper rivet tool and/or procedure for putting in the rivets for the striker plates for the deck lid on a '65 would be? Thanks.

Dave Marshall

[Dave65]

Originally Posted by dgmpam

Does anyone know what the proper rivet tool and/or procedure for putting in the rivets for the striker plates for the deck lid on a '65 would be? Thanks.

Dave Marshall

I used aircraft riveting equipment when I did mine. An explanation with some pictures is shown here (look for the response about half way down the page).

http://vetteheads.com/forums/showthread.php?t=2507

Good luck, that lip is a fairly fragile part of the body.

Dave