c2 steering column issues

[hatdragracer]

I installed my newly restored guage cluster last night. on my test drive, the horn seemed to have a mind of its own. The turn signals worked, but the indicator lights on the cluster would only work if slight pressure is held on the turn signal.

Can anyone provide info on disassembly of the steering column, or perhaps a simple fix for these problems?

[vetzs]

you might remove the steering wheel to get a look at the light switch and general alignment of everything inside. Sometimes when you have the column out and the combination of the wheel rotating and in and out play things can get misalligned.

[cfalson]

Have the same problem, removed the column and siwtch, adjusted contacts, NG, save yourself the time the harness is available the switches are the problem. The switch is independent of any column adjsutment.
M&H has the switch and harness for $35, it's a good investmenst