A day of projects (Flowmaster and bushing related)

Edmond · 05-10-04, 09:23 PM

So I'm finally getting around to replacing the broken bolt that goes into this:

The bolt was broken off and I had to drop the muffler to get to it. I figured that I would drop both mufflers and repaint them since they're starting to flake. Here are both sides of the Flowmasters:

and

First, I took the mufflers off and sanded the excess paint off them. Then I repainted them with high heat paint from Home Depot and now they look like:

And this is me waiting for the paint to dry:

That is my Martin D-28 acoustic guitar "Rosa." It was pretty warm today, in the low 80's and sitting outside wasn't very fun. But Rosa and I got some sunshine.

And these are my 3 cars:

There's a 83' Z28 and a 94' Camry, which is my daily driver. And it'll probably stay that way as long as these gas prices are like this.

I have to say that I'm going to get rid of the Flowmasters at the end of this year. I'm going with a total stainless steel system. I'm guessing that there is internal rust in the mufflers because I can hear something in there. I only paid $350 for the set of mufflers and the rear y-pipe and it's been two years so I'm not complaining. Borla Stingers here I come!