big block heads al.

donmac · 03-25-04, 10:36 PM

i have a pair of castings #3946074 is anyone interested

geopar · 03-26-04, 11:08 AM

Hi . Condition , date codes , price ? Thanks

donmac · 03-27-04, 09:03 PM

Quote:

Originally Posted by geopar

Hi . Condition , date codes , price ? Thanks

these heads are as new , other than .005 remove for clean up. not sure of exacy build date as they are in storage but i know they are 70. also have block casting#3963512 has f 7 stamped inside bell housing not sure what this means block is .100 over

geopar · 03-28-04, 08:51 AM

Hi again . Do you have a $ figure in mind for the heads ? Thanks , Geo

early shark · 03-28-04, 11:05 PM

I would also be interested in the aluminum heads as well. Please let me know what price you are asking and whether there are any repairs/welds or if they have been milled or ported? Thanks, Warren

donmac · 03-29-04, 08:30 AM

Quote:

Originally Posted by geopar

Hi again . Do you have a $ figure in mind for the heads ? Thanks , Geo

I don't really know what these heads are worth, but i have been told that 1500.00 each would be a starting point. I am in canada so supply and demand would dictate the price.

donmac · 03-29-04, 08:40 AM

Quote:

Originally Posted by early shark

I would also be interested in the aluminum heads as well. Please let me know what price you are asking and whether there are any repairs/welds or if they have been milled or ported? Thanks, Warren

the heads don't have any repair marks on them and i haven't really examined the ports and runners for mods. the heads have been pressure tested and resurfaced only to clean up a small amount of corrosion at the coolant passages about .oo5 was removed from them. I don't really know what these are worth.

early shark · 03-30-04, 08:47 AM

donmac:

If you get the time or chance to look at the dates on the heads, and they have not been modified, I would be interested in purchasing them.

Thanks, for the consideration......Warren

donmac · 03-31-04, 01:42 PM

Quote:

Originally Posted by early shark

donmac:

If you get the time or chance to look at the dates on the heads, and they have not been modified, I would be interested in purchasing them.

Thanks, for the consideration......Warren

the head build dates are 5.20.70 and 4.8.70 other numbers on them are 5719 and 5802. Im notsure what those other numbers are but they are the only numbers different to each head other than date codes. there is a casting stamp 6 7 8 9 10 with a large E and a small g sideways on both heads close by is a 'P' with what looks like a crown.

early shark · 03-31-04, 05:28 PM

domac:

You have e-mail from me.