PDA

View Full Version : I have some news for you from an Australian magazine called MOTOR


Rick Daniel
10-22-03, 02:56 PM
In the October issue of this year an article was written about the Gen IV engine details and capacities to be released.

"General Motors executive Gary Cowger couldn't stop himself from bragging about Chevrolet's new Gen IV V8 engine. Sources within GM Powertrain have admitted to 6.0-litre and 6.2-litre capacities, but Cowger let slip that GM has also concocted a 406 cubic inch (6.7 litre) Gen IV V8.
The cubically colossus Gen IV is planned for release in the redesigned Corvette (C6) next May, initially. The engine will be built in limited numbers only - around 3000 a year for the high-performance Z06-spec Corvette as an answer to the new Dodge Viper. From there, the 6.7-litre aluminium V8 could find a home at HSV, possibly in a GTS-spec all-wheel-drive model. Cowger gave no hard facts about the engine other than its capacity.
However, insiders at GM Powertrain talk freely about the Gen IV's improvements, mainly those to the valvetrain, cylinder heads and intake manifold. The Gen IV V8 has been substantially improved and will develop more power per litre than the current Gen III V8.
Roughly figuring 53kW/litre, the big V8 could quite easily max out at 360kW, probably more.
Bore and stroke are hard to call, but 101.5mm bore and 103mm stroke as near as dammit to 406ci. As for torque, the long stroke will strong arm about 650Nm."

360 kW is 482 hp.

650 Nm is 479 lb-ft.

This was an email sent to me this morning.:)

Ken
10-22-03, 04:18 PM
Interesting. Thanks Rick. :upthumbs

Tru_Ice
10-22-03, 08:44 PM
I told you all a source told me the next gen ZO6 is gonna be spec-ed at 485hp.

ROCKETBLOCK
10-22-03, 10:10 PM
Sounds good to me!:beer

AUSSIEVETTEMAN
10-23-03, 01:14 AM
I started a poll:
Should the Corvette be available Right Hand Drive?.

This information on the next Generation IV engine is excellent as it proves that the engine is worthy of being available on the world stage. I believe the Corvette is too!

We cannot wait until the new C6 Corvette is realeased, as it will show what engines are destined for Australia.
It will make racing at Bathurst really interesting!

Excellent heads up Rick.

Cheers

Tony

MaineShark
10-24-03, 09:43 AM
Hmmm... how long until we see it as a crate engine? :)

Maybe I should re-think building a large-displacement iron small-block, if I'll be able to buy a fairly large aluminum small block, right from GM, in a few years :)

Joe

Brett
10-24-03, 04:54 PM
You have to wonder though, what is the limit?

A problem with Vipers is that they have so much torque that they are very hard to hook up, and it hurts their performance. I don't want that to happen to Corvette.



Brett