ZR-1 Engraved Billet Center Caps

[SPEEDEMON]

Hello All

I’m helping out Carter with this project here since I was involved with these caps in the past. We're taking orders for these ZR-1 engraved billet center caps. These caps are very high quality, machined out of 6061 T-6 aircraft quality solid billet aluminum, made with 3 Allen locking screws on the backside to prevent theft, polished to a luster mirror finish. The prices on these caps are $210.00 per set, which includes ground shipping inside the 48 states. We will accept orders starting now through 2/15/03, which will be the last day to order. The orders then will be processed and sent to manufacturing and finishing which you should received these items in about 4 weeks or so. These caps are made to order and will only be offer on limited runs. We ran these last and had a problem with the previous finisher which took forever to ship, but that won’t happen this time around since we have taken care of that problem and now we have changed to a new finisher which will be more prompt on time as far as delivery time.

These caps can be viewed at the link below:
http://www.boomspeed.com/speedemon/010901.jpg
http://www.boomspeed.com/speedemon/ZR-1CenterCap.jpg

For more info on these, you can contact Carter at ctengr@colemantx.com or me.

We have to have a minimum order of 5 sets or more to have these made. This should be easy since we have been getting a lot of inquiries on these recently. So if anyone would like a set these, they can be ordered by sending a check payable to:

CT Engineering
200 Palestine Street.
Coleman, TX 76834

Also please include your e-mail address and phone number.

Thanks

[FrankUrbinati]

Art , Will they accept credit card or paypal ?

[SPEEDEMON]

Frank

You might want to e-mail Carter at ctengr@colemantx.com

I don't think he's taking credit cards on these items.

[Rob]

Art,

Thanks for the heads-up on these. They look sharp!

[SPEEDEMON]

Hello All

Sorry I made a mistake on the price of the caps. These caps are $210.00 a set including shipping inside the 48 states. I was in a hurry earlier typing this and I apologize for my mistake, but hey I’m human. So again it’s $210.00, which is the same as last year's price.

[90 Corvette ZR-1]

by per set I am assuming you mean for all 4.

[SPEEDEMON]

That's correct, there's 4 to a set!

[90 Corvette ZR-1]

Thats what I thought but I wanted to make sure. You know what happens when you assume

[cvette]

Those things are sweet!

[carter200]

Thanks, CVETTE I aim to please

[SPEEDEMON]

Hello All

Those of you that are interested in these ZR-1 billet center caps, here is a more detailed photo of them front and back side:

http://www.boomspeed.com/speedemon/ZR1caps.jpg

Here’s a photo of them on a polished ZR-1 wheels:

http://www.boomspeed.com/speedemon/010901.jpg

And here is a photo of them on chromed ZR-1 wheels:

http://www.boomspeed.com/speedemon/ZR-1CenterCap.jpg


Thanks
Art
95 ZR-1
Aqua/Blk #389

[SPEEDEMON]

Hi All

Just a reminder that if you’re thinking about getting a set of these caps, we must receive your payment no later than February 15th which is the last day to place an order for these caps.

Thanks
Art

[Rob]

Art, I'll stick this thread up at the top of the forum....