Bookmark This Page | Recommend This Page
 

Industry Partners
Art
Brakes
Dealers
Baystate Motorsports
Corvette Mike New England

E-mail: Chris Warren
E-mail: Kevin Will


E-mail: Ron Ignelzi
Driving Schools
General
Carseek
Parts & Accessories
Corvette Guys
Custom Corvette Accessories
Ecklers
Zip Products

Go Back   Corvette Action Center > 1984 - 1996 Corvettes > C4 Technical and Performance


C4 Technical and Performance For technical and performance related discussion of 1984 - 1996 Corvettes.

Reply
 
LinkBack Thread Tools Display Modes
Old 12-05-02, 07:35 AM   #1 (permalink)
Member
HallenTi is offline
 
HallenTi's Avatar
 
Join Date: Nov 2002
Location: Auburn, WA
Posts: 145
My Corvette(s):
Black 1999 coupe
Default Window sticker and build sheet from NCM

In shopping for a window sticker at the NCM, I see that in order to get a window sticker, I must also order a build sheet at the same time. The non-member window sticker price is $30 and the build sheet is $40. I can order the build sheet separately, however.

Although I'd like both, I am wondering if just the build sheet would suffice, but I have never seen one. I basically want to find out exactly what the car has as far as factory options. I am not necessarily concerned with the details of what the retail costs were and the estimated MPG, etc., although that would be fun too. So, would the build sheet be basically want I want? Does anyone have a scanned sample from any car, just to give me an idea of what it looks like? If I go "cheap" and get just the build sheet, will I wish I had the window sticker too and then be stuck buying another build sheet, just to get the window sticker?
  Reply w/ Quote |
Old 12-05-02, 09:01 AM   #2 (permalink)
Supporting Member
Vettelt193 is offline
 
Vettelt193's Avatar
 
Join Date: Jun 2002
Location: Tallahassee, FL
Posts: 2,707
My Corvette(s):
1996 LT4, Z51 CE Coupe -- (sold to Hrtbeat1)
Default

your car should already have that, underneath the center console lid... they are listed as 3 digit codes, which can be translated
  Reply w/ Quote |
Old 12-05-02, 09:18 AM   #3 (permalink)
Supporting Member
DkBG is offline
 
DkBG's Avatar
 
Join Date: Jan 2002
Location: Butler In. USA
Posts: 1,288
My Corvette(s):
None
Default

I bought both sheets for my 87 . I think it's really cool to have them and it also helps support the museum . Cliff
  Reply w/ Quote |
Old 12-05-02, 10:12 AM   #4 (permalink)
Supporting Member
JonM is offline
 
JonM's Avatar
 
Join Date: Mar 2002
Location: East Haven, CT- USA
Posts: 4,607
My Corvette(s):
84 Coupe
Default

As mentioned above, your RPO numbers should be under the lid...and if you want to print out an immitation window sticker go here

http://corvetteparts.com/cgi/sticker/sticker.shtml
  Reply w/ Quote |
Old 12-05-02, 10:24 AM   #5 (permalink)
Member
HallenTi is offline
 
HallenTi's Avatar
 
Join Date: Nov 2002
Location: Auburn, WA
Posts: 145
My Corvette(s):
Black 1999 coupe
Default

Thanks to all. I had already forgotten about the list of options under the console lid, so thanks for that! I also tried the window sticker link...interesting. Tim
  Reply w/ Quote |
Old 12-05-02, 10:26 AM   #6 (permalink)
Supporting Member
vetteguy is offline
 
Join Date: Jun 2002
Location: Abingdon,MD
Posts: 262
My Corvette(s):
1996 Torch Red LT4
Default

Yea, build sheet is same as the RPO codes already in the car. I think there is supposed to be a build sheet stuck to the gas tank or something. All I wanted was a window sticker but had to buy a build sheet also. While I was at it I got a brochure for $10. Total cost was $82. I think if you buy a build sheet you might as well get the window sticker while you are at it. Guy
__________________
current- Torch Red 96 LT4,15k miles,Corsa's and The Claw
current - 2004 XL1200 R Harley Sportster
Sold - 85 Black Coupe
  Reply w/ Quote |
Old 12-05-02, 10:39 AM   #7 (permalink)
Member
HallenTi is offline
 
HallenTi's Avatar
 
Join Date: Nov 2002
Location: Auburn, WA
Posts: 145
My Corvette(s):
Black 1999 coupe
Default

Thanks to all. I had already forgotten about the list of options under the console lid, so thanks for that! I also tried the window sticker link...interesting. Tim
  Reply w/ Quote |
Old 12-05-02, 12:24 PM   #8 (permalink)
Member
c4cruiser is offline
 
c4cruiser's Avatar
 
Join Date: Feb 2002
Location: Lacey, WA USA
Posts: 992
My Corvette(s):
87 Gold Z52 Coupe 02 EB Z51 Supercharged Coupe
Default

The build sheet is the document that follows the car down the assembly line as it is put together. Not only are the RPO codes listed at the bottom of the sheet, there are other codes for specific components, the date and time of the start of assembly, build sequence number, receiving dealer, order number, specific front and rear shipping weight and a bunch of other stuff.

There are actually 2 build sheets in the car. One is on the forward top portion of the gas tank and is glued in place. The other is rolled up and inserted in the front crossmember. This one can be removed "IF" you can get hold of it with needle-nose pliers, twist it into a really small roll and pull it through a 1/2" diameter hole without tearing it.

I got the window sticker along with all of the other documents when I bought the car (used). It was never placed on the window so it looks brand new. Even though the "regular" C4's may never be collector's items, I like having all the documentation. I even found a sales brochure and the C4 VHS video which is narrated by Dave McLellan.

Go for both documents! Together, they would look neat in a picture frame in a den or even the garage. Getting these helps support the National Corvette Museum. You should even consider becoming a member of the Museum. You will get 10% discounts at the store (inclubing the build sheet and window sticker) and the membership is even tax-deductible.
__________________
C4cruiser
Corvettes de Olympia
Classical Glass Corvette Club
NCM Member #7353
VP, Northwest Association of Corvette Clubs
02 Vortech supercharged EB Coupe
87 Gold Coupe 4+3 Z52
My Past Vettes: 92 Vert, 78 L82 Coupe, 73 L82 Coupe, 70 LS5 Coupe
  Reply w/ Quote |
Old 12-06-02, 07:33 AM   #9 (permalink)
Member
Corvette-Pilot is offline
 
Corvette-Pilot's Avatar
 
Join Date: Sep 2002
Location: Dracut MA
Posts: 583
My Corvette(s):
1994 Black Rose Coupe
Default

I also ordered both sheets,
I didn't have the original window sticker and find it interesting to see what the car cost.
I also found that the car originally came with a Bose CD player and new doesn't

The build sheet I can't seem to make heads or tails out of it?
Some stuff I figured out but not all ??
I would like to find a site or something that explains what it all means but it looks like each station signs off the work they did.

One really cool thing is that I can see the exact second my baby was born

I also learned that I have the wimpy 2.59 gears.
This isn't listed on the window sticker.

I find it fun to have just for me..

I vote go for it !
  Reply w/ Quote |
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 12:35 AM.


Powered by vBulletin® Version 3.8.0 Beta 4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0