Alex,
You never said if your car was an auto or stick. My experience is with the Hypertech III. I used the program to lower my fan temp, use 91 octang fuel curve and raised my RPM limiter to 6400. My car runs around 190-200 degrees. After instalation I did not have any "seat of the pance" feel. However if you have a automatic the programer will let you change shift points for better use of the LS1 power band for better 0-60 times and 1/4 times. Its a tough call, hopefully someone out there has used the chip. I have installed a new aircleaner, throttle bypass, and removed my mass air sensor screan, freeing up air and making the engine run cooler (but not to cool) helps out. Good luck
v/r
THE YAV
|